1:48 Focke-Wulf Fw 190A-8

Focke-Wulf Fw 190A-8 is an injection-molded kit of the German Second World War fighter in 1:48 scale from Dragon.

Scale1:48
Manufacturer Dragon
Product EAN8591111611824

Responsibility details are not available.

35.96 € 26.96 €
22.28 € without VAT
−25 % You save 9 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Focke-Wulf Fw 190A-8 in 1:48 scale (Dragon)

An injection-molded plastic kit of the most widely built version of the Focke-Wulf Fw 190 fighter. The model in 1:48 scale offers fine recessed surface engraving and a well detailed cockpit and engine section. The molds of this Dragon series follow on from older Japanese toolmaking and at the time of release they were among the best available in this scale; some boxings therefore also held extra materials beyond the plastic.

The real subject

The Fw 190 was a single-seat fighter with a BMW 801 radial engine which from 1941 joined the Luftwaffe's standard Messerschmitt Bf 109s in service. The A-8 version appeared in 1944 and became the most numerous variant of the whole A series. Compared with the earlier versions it received heavier armament, revised equipment and the ability to carry an auxiliary fuel tank or an increased ammunition supply. The typical armament consisted of a pair of synchronized 13 mm machine guns above the engine and 20 mm cannons in the wing. A-8 machines were used above all against bomber formations, and there were also sub-variants with additional armor or with equipment for night operations.

Building and painting tips

Start with the cockpit and the engine, which have to be finished and painted before the fuselage is closed. Glue with liquid cement for plastic and it is better to sand down the joints on the leading edges and under the fuselage. Apply a primer before painting; the typical German fighter schemes of 1944 combine a light underside with a gray-green upper surface and a mottled pattern on the fuselage, which is best sprayed with an airbrush at low pressure or over masking putty. Lay a gloss clear coat compatible with the paint used under the decals, then add a wash into the engraved lines once it has dried and seal it with a matte coat.

Who the model is for

  • Collectors of German Second World War fighters in 1:48 scale
  • Modelers who appreciate fine engraving and a detailed cockpit
  • Anyone interested in the most widespread version of the Fw 190A series
  • Moderately advanced builders of aircraft models

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The exact contents differ between the individual boxings of this series. Unless stated otherwise, count on a plastic kit and buy the extras separately.

The A-8 is the most numerous variant of the A series, from 1944. It brought heavier armament, revised equipment and the ability to carry an auxiliary fuel tank or an increased ammunition supply.

It is more for the moderately advanced. The cockpit and the engine section have a number of small parts and they need to be finished before the fuselage is closed.

Last seen

1:48 Focke-Wulf Fw 190A-8-25 %Stock ClearanceFavorite
DragonDR55021:48

1:48 Focke-Wulf Fw 190A-8

Focke-Wulf Fw 190A-8 is an injection-molded kit of the German Second World War fighter in 1:48 scale from Dragon.
Last one!
35.96 €26.96 € You save 9 €
Pimp My MiniaturesAFVs35-0101:35

1:35 Autoblinda flat tire set AB 41-43 type 1 (2 pcs wheels)

A pair of wheels with a deflated tire for the Italian armored car Autoblinda AB 41 and AB 43 in 1:35 scale , in the tread pattern designated as the first type. An accessory by Pimp My Miniatures.
In stock
9.16 €
KelikRSK72-00761:72

1:72 AMX GHIBLI INTERIOR 3D DECALS FOR ITALERI KIT

Colored three-dimensional interior elements for the kit of the AMX Ghibli aircraft from Italeri in 1:72 scale. They complete the instrument panel, the side panels and the seat with no hand drawing of dials.
In stock
9.16 €
EduardED6489131:48

1:48 Bf-109K-4 exhaust stacks 3D-printed

Exhaust stacks for the Bf 109K-4 in 1:48 scale from Eduard. A resin set of exhaust stubs made by direct 3D printing, a replacement for the plastic parts.
In stock
6 €
Pimp My MiniaturesAFVs35-0151:35

1:35 Sd.Kfz 7 front wheels with spare (weighted) type 1

With this set the eight-ton German half-track tractor receives front wheels with a trodden patch and a spare in 1:35 scale . The tread pattern is designated as the first type, and the accessory comes from Pimp My Miniatures.
In stock
11.16 €
Pimp My MiniaturesAFVs35-0911:35

1:35 M2/M3/M16 Halftrack front wheels set with spare (weighted) type 2

Replacement front axle wheels with a spare for models of the M2, M3 and M16 halftracks in 1:35. The type 2 variant brings a different tread pattern and tires with a flattened contact patch.
In stock
9.16 €
AiresAIR72821:72

1:72 F/A-18E/F Super Hornet cockpit set

The Aires 1:72 F/A-18E/F Super Hornet cockpit set is a resin aftermarket set for experienced modelers that replaces the cockpit of a kit of this American carrier-based multirole aircraft with a three-dimensional casting complemented by photo-etched parts.
In stock
20.80 €
GAS HANSGH-T720071:72

1:72 T-34 Halved WAFER Tracks

Tracks for the T-34 in the halved variant of the waffle pattern, 1:72 scale, from the brand GAS HANS. These are replacement tracks for a model, not a kit of the tank.
In stock
11.16 €
1:72 SB2C undercarriage-25 %Stock ClearanceFavorite
EduardED725501:72

1:72 SB2C undercarriage

1:72 SB2C undercarriage is a photo-etched set from Eduard for sharpening up the landing gear of a model of the Curtiss SB2C Helldiver carrier-based dive bomber in 1:72 scale.
Last one!
10.40 €7.80 € You save 2.60 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.