1:72 3 x 500 kg mine bomb m/56 Lyra

The 500 kg m/56 Lyra mine bomb, three pieces in 1:72 scale is a resin set from the Maestro Models brand. It completes the stores of a model with a Swedish heavy bomb that kits usually do not contain.

Scale1:72
Manufacturer Maestro Models
Product EAN8591111000000

Responsibility details are not available.

7.56 €
6.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The 500 kg m/56 Lyra mine bomb in 1:72 - three pieces from Maestro Models

The package contains three resin castings of the Swedish 500 kg mine bomb designated m/56 and named Lyra, in 1:72 scale. It is not a model of an aircraft nor a kit, but an armament accessory for the stores or the bomb bay of a finished model, or for a diorama with ground crew. Maestro Models is a Swedish brand that has long devoted itself to domestic aircraft and their armament.

The real subject

The designation m/56 is the Swedish way of writing the year of entry into service, that is, the 1956 type. A mine bomb differs from a classic fragmentation one in its thinner casing wall and a higher proportion of explosive relative to total weight - the main effect is a blast wave, not penetration. This design suited area and soft targets and the Swedish Air Force kept it in its armament for whole decades. The 500 kg size was among the heavier loads an attack aircraft could carry on its inner pylons; on a model it therefore markedly changes the overall impression of the stores.

Building and painting tips

In 1:72 scale the bomb is smaller but all the more sensitive to the cleanness of its shape. Cut the casting block off with a fine-toothed saw and level the cut surface on sandpaper laid on glass, so that all three pieces bed down the same. Wash the castings in lukewarm water with dish soap, otherwise the paint will not hold. They are attached with cyanoacrylate glue applied with a wire in a small drop. Painting is best managed while they are still on a stick: primer, the opaque shade, and only then the narrow identification bands through masking tape - painting those with a brush in this scale is all but impossible. Keep the wash to a suggestion of the longitudinal seams; overdone weathering would look unconvincing on a bomb in service.

Who the set is for

  • Builders of Swedish combat aircraft in 1:72 scale
  • Modelers who want more faithful heavy stores
  • Builders of dioramas with munitions and handling equipment
  • Those interested in Cold War armament

This is an accessory set, not a model in its own right. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Three pieces, according to the name of the product. That is enough for the stores of one model as well as for completing a scene with munitions beside an aircraft.

The designation m/56 is the Swedish way of writing the year of entry into service, that is, the 1956 type. Lyra is a name of its own within the Swedish range of bombs.

It has a thinner casing and a higher proportion of explosive, so it acts mainly through the blast wave. It is not intended to penetrate armor or sturdy cover.

Paint them on a stick before gluing: primer, the opaque shade and the identification bands sprayed through masking tape. In 1:72 thin bands are practically impossible to manage with a brush.

Last seen

Maestro ModelsMMK72651:72

1:72 3 x 500 kg mine bomb m/56 Lyra

The 500 kg m/56 Lyra mine bomb, three pieces in 1:72 scale is a resin set from the Maestro Models brand. It completes the stores of a model with a Swedish heavy bomb that kits usually do not contain.
In stock
7.56 €
ReskitRSM48-00061:48

1:48 MV-22 Osprey Painting Masks for HobbyBoss kit

The Reskit masking set MV-22 Osprey in 1:48 scale : self-adhesive masks for cleanly painting the glazing and the cockpit of the MV-22 tiltrotor.
In stock
7.96 €
GasPatch modelsGP15-480701:48

1:48 WWI German Parabellum MG14 Machine Guns (2pcs, Resin)

Parabellum MG14 (2 pcs) 1:48 is a resin detail set from GasPatch models — a pair of German Parabellum MG14 aircraft machine guns of the First World War.
In stock
7.96 €
Special HobbyQ724001:72

1:72 Focke Wulf Fw 190D-9 Main Wheels for IBG kits

Special Hobby 1:72 Focke-Wulf Fw 190D-9 main wheels is a resin set of weighted landing gear wheels as a replacement for the parts on Fw 190D-9 models in 1:72 scale. The wheels are meant for IBG kits.
In stock
4.76 €
1:72 OV-10A Bronco male pilots (in a standing position - type 1) (2 pcs)-25 %Stock ClearanceFavorite
ReskitRSF72-00331:72

1:72 OV-10A Bronco male pilots (in a standing position - type 1) (2 pcs)

Figures of OV-10A Bronco pilots standing in 1:72 scale from Reskit, in the variant given as type 1.
Last one!of 5
9.96 €7.48 € You save 2.48 €
FlyhawkFH11641:700

1:700 WWII USN Carrier-based Aircraft I (F4F/SBD/TBD)

WWII USN Carrier-based Aircraft I 1:700 is a set of F4F, SBD and TBD carrier aircraft meant to fill out models of American aircraft carriers.
In stock
11.56 €
Model MakerMM-D481521:48

1:48 MiG-21 in Polish service exclusive edition part III

MiG-21 in Polish service exclusive edition part III decals in 1:48 scale. The third sheet of the Polish series from the brand Model Maker.
In stock
15.56 €
Hobby BossHB845071:35

1:35 Lvkv 9040 Anti-Air Vehicle

Hobby Boss 1:35 Lvkv 9040 is a plastic kit of the Swedish tracked anti-aircraft vehicle from the CV90 family of infantry fighting vehicles.
In stock
49.96 €
1:48 Grumman KA-6D Intruder 3D-Printed & coloured Interior on decal paper-25 %Stock ClearanceFavorite
Quinta StudioQD481831:48

1:48 Grumman KA-6D Intruder 3D-Printed & coloured Interior on decal paper

KA-6D Intruder 3D interior 1:48 from Quinta Studio is a colored relief cockpit interior on decal paper. It is applied with water, without glue.
3 leftof 4
20.36 €15.28 € You save 5.08 €
AK MUSEUM OFFICIAL WHITE T-SHIRT size XXL-25 %Stock ClearanceFavorite
AK interactiveAK9221

AK MUSEUM OFFICIAL WHITE T-SHIRT size XXL

AK Museum Official White T-Shirt in size XXL is a white T-shirt from the official range of museum promotional items of the brand AK interactive. It is clothing merchandise, not a modeling product.
Last one!
27.96 €20.96 € You save 7 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.