1:72 McDonnell F-4B/F-4N Phantom wheel bay paint masks

1:72 McDonnell F-4B/F-4N Phantom wheel bay paint masks

6.76 €
Add to Cart

1:72 McDonnell F-4B/F-4N Phantom wheel bay paint masks

QMT 1:72 McDonnell F-4B/F-4N Phantom wheel bay paint masks is a masking set for painting the wheel bays of models of the naval Phantom versions F-4B and F-4N in 1:72 scale.

Scale1:72
Manufacturer QMT
Product EAN8591111000000

Responsibility details are not available.

6.76 €
5.59 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

QMT 1:72 McDonnell F-4B and F-4N Phantom masking set, wheel bays

The package contains self-adhesive masks cut to the outline of the wheel bays of a model in 1:72 scale. It is not a kit. The masks come into play only after the interior of the bay has been sprayed, when they cover the finished area and make it possible to spray the rest of the model with no risk of the shades mixing. According to the name the set is intended for the naval Phantom versions F-4B and F-4N.

Pressing the edge down decides the result

The most common mistake in masking is not a badly shaped mask but an edge that has not been pressed down. It takes only a mask standing a fraction of a millimeter off at the edge, and thinned paint gets under it by capillary action. A blurred, misty transition appears, and that is hard to repair. So the edge of the mask is run over with a blunt tool around the whole perimeter after it is applied, and on the curved parts more than once. Only then does it make sense to reach for the airbrush.

The real subject

The F-4B was one of the first production naval versions of the two-seat Phantom, and the F-4N came out of a later upgrade of F-4B machines with changes to the airframe and the systems to extend its life. For modelers both versions serve as the classic naval shape of the type, with a pronounced cranked wing and two engines.

Usage tips

Thin the paint rather less; heavily thinned paint creeps under a mask more readily. Spray in thin coats with a pause between them. If you are going to apply a clear coat after spraying, allow for the fact that the coat also gets under a badly pressed edge, so the mask has to sit properly from the first layer on. Once it is off, check the transition from the side against the light, as that is the best way to spot an unevenness.

Who the set is for

  • builders of the naval Phantom versions in 1:72 scale
  • modelers who want a clean edge with no paint creeping under
  • those who finish a model with a clear coat and need reliable masking
  • builders who prefer a finished die-cut to cutting by hand

This is an accessory to a kit. The model itself, the paints and the glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Most often because the edge of the mask was not pressed down around the whole perimeter after it was applied, or because the paint is thinned too much. Running a blunt tool along the edge and spraying thinner coats both help.

Yes, provided the edge holds well. A clear coat gets under an edge standing off just as easily as paint does, so the pressure needs to be checked beforehand.

The name states both the F-4B and the F-4N, which have the same wheel bay arrangement. Check the actual extent of the sheet against the die-cut in the package.

Last seen

QMTQMTM720071:72

1:72 McDonnell F-4B/F-4N Phantom wheel bay paint masks

QMT 1:72 McDonnell F-4B/F-4N Phantom wheel bay paint masks is a masking set for painting the wheel bays of models of the naval Phantom versions F-4B and F-4N in 1:72 scale.
In stock
6.76 €
TrumpeterTR071791:72

1:72 Russian 9P113 TEL w/9M21 Rocket of 9K52 Luna-M Short-range artillery rocket system(FROG-7)

An injection-molded plastic kit of the Russian 9P113 launch vehicle with the 9M21 rocket of the Luna-M system (FROG-7) from Trumpeter in 1:72 scale.
In stock
28.36 €
Quinta StudioQT480761:48

1:48 Italian WWII aircraft torpedo F200-450 (all kits)

The Italian 1:48 aircraft torpedo F200-450 from Quinta Studio will complete a model of an Italian bomber of the Second World War with its characteristic weapon.
In stock
8.36 €
MH modelsMHX720311:72

1:72 Short Sunderland Mk.V Markings airbrush mask for Special Hobby

A masking set for the markings of the Short Sunderland Mk.V in 1:72 scale lets you spray the markings of the aircraft directly onto the camouflage, without decals and with no risk of silvering. Intended for the Special Hobby kit.
In stock
7 €
Voyager ModelPE354681:35

1:35 WWII Imperial Japanese Navy Type 2( Ka-Mi) Amphibious Tank (For DROGON 6678)

Voyager Model 1:35 photo-etched set - Type 2 Ka-Mi is a detailing accessory in brass photo-etch for models of the Japanese amphibious tank Type 2 Ka-Mi. It is not a kit but a set of improvements for a basic model.
In stock
7.96 €
Tabu designTABU240941:24

1:24 Toyota Celica TA64 - Safari Option Decal Set (for NuNu Kits)

The supplementary Toyota Celica TA64 - Safari, Option Decal Set in 1:24 scale from Tabu design. Alternative markings for a Group B car in the Safari Rally.
In stock
9.16 €
Voyager ModelFE350371:35

1:35 Russian 9K37M1 BUK Air Defense Missile System Antiskid plate(For MENG SS-014)

Photo-etched anti-skid plates for the 9K37M1 Buk anti-aircraft missile system in 1:35 scale are an add-on set for a plastic kit you already own, not a model. They replace a sprayed or merely suggested anti-skid finish with genuinely textured metal. The target kit is Meng SS-014.
In stock
7.96 €
AFV ClubAFV35S521:35

1:35 Churchill Mk.VI w/Ordance QF 75mm Mk.V Gun

The Churchill Mk.VI with the 75 mm gun is an injection-molded plastic kit of the British infantry tank of the Second World War in 1:35 scale from AFV Club. The model is supplied unassembled and unpainted.
In stock
41.56 €
Voyager ModelPE359611:35

1:35 Modern Russian 9K37M1 BUK Air Defense Missile System Upgrade set(For MENG SS-014)

The Voyager Model 1:35 photo-etched upgrade set for the modern Russian 9K37M1 Buk anti-aircraft missile system is not a model but a brass photo-etched accessory for the Meng SS-014 kit you already own. It adds to the vehicle thin mesh, sheet and load-bearing features that cannot be made from plastic.
In stock
31.56 €
ReskitRSU72-02441:72

1:72 610 GALLON FUEL TANK LATE F-4 (F, G)

A resin drop fuel tank of 610 gallons, late type, for the F-4F and F-4G Phantoms in 1:72 scale by Reskit.
In stock
9.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.