1:10 Celtic Warriors 1st C. BC Battle of the Beast

1:10 Celtic Warriors 1st C. BC Battle of the Beast

50.76 €
Add to Cart

1:10 Celtic Warriors 1st C. BC Battle of the Beast

Young Miniatures 1:10 Celtic Warriors 1st C. BC Battle of the Beast is a resin portrait bust in 1:10 scale with a Celtic subject. It is supplied unpainted and the main work is the painting.

Scale1:10
Manufacturer Young Miniatures
Product EAN8591111755733

Responsibility details are not available.

50.76 €
41.95 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Young Miniatures 1:10 Celtic Warriors - resin bust

A portrait bust in modeling resin in 1:10 scale from the Young Miniatures studio, with a Celtic warrior of the first century BC as its subject. It is supplied unpainted and is not built like a model: putting the parts together is a matter of minutes, whereas preparing the surface and the painting take up most of the time. This type rests on strong modeling of the face, on rich hair and beard and on accessories in various materials. In painting terms that means three separate tasks: glazes on the skin, strands of hair done with a thin brush and a contrasting treatment of metal and leather.

Preparing the casting

Wash the casting in lukewarm soapy water, because resin holds mold release agent from the mold and neither paint nor primer will stick to it. Cut the casting gates off with a sharp scalpel and finish the surfaces with wet sandpaper; protect your airways while sanding. Dry-fit the parts first so that you know where to fill. Fill the seam with modeling putty or with super glue and an accelerator, sand it back and restore the interrupted texture with a scriber. Where a repair interrupts the texture of hair or cloth, it shows at once as soon as the primer is sprayed. Finally apply a thin coat of primer, ideally gray, which shows up the remaining scratches and unifies the base.

Painting the skin, the hair and the accessories

Build the skin up from a mid-tone layer: glazes in the eye sockets, under the cheekbones and in the corners of the mouth, lightening on the forehead, the bridge of the nose and the chin. Oils let you blend the transitions soft, acrylics layer faster. Paint the eyes in an off-white, never a pure white, then the iris, the pupil and the line of the upper eyelid. Start the hair and the beard from a dark base, pick the strands out with a thin brush or a dry brush and leave deep shadows between them; with light and red shades build the highlights gradually so that the area does not flatten. The metal elements can be done with translucent metallic paint over a smooth darker base or with the non-metallic metal technique, and then a dark glaze goes into the hollows to separate the details. Leave the leather satin and the cloth matte, and at the end unify the sheen according to the materials. Pin and glue the finished bust to its base and display it under light from above and in front.

Who the bust is for

  • Figure painters who want to practice hair, beards and skin in a large format
  • Collectors of historical portrait busts in 1:10 scale
  • More experienced modelers, since resin calls for washing, cutting and filling
  • Anyone who enjoys the combination of skin, metal and leather on one piece

The bust is supplied unassembled and unpainted. Paints, glue and putty are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Start from a dark base, then pick the strands out with a thin brush or a dry brush so that a deep shadow stays between them. Add the highlights gradually in thin coats; one heavy lightening will flatten the area.

Busts of this format are usually divided into several parts so that the deeply set surfaces are reachable with a brush. Check the exact number of parts on the box.

Super glue, and an epoxy on larger surfaces. Classic modeling cement for plastic does not work on resin, because it does not dissolve it.

It is not necessary. It is useful for the primer and for unifying the base, but the painting of a bust itself is done with a brush. The primer can also be handled with a spray can in a well-ventilated space.

Last seen

Young MiniaturesYMYH18221:10

1:10 Celtic Warriors 1st C. BC Battle of the Beast

Young Miniatures 1:10 Celtic Warriors 1st C. BC Battle of the Beast is a resin portrait bust in 1:10 scale with a Celtic subject. It is supplied unpainted and the main work is the painting.
In stock
50.76 €
L Decals StudioLDS480011:48

1:48 MiG-21MF a SM in Czech, Slovak, Polish and Soviet Service

A decal sheet, MiG-21MF and SM in Czechoslovak, Slovak, Polish and Soviet markings , in 1:48 scale from L Decals Studio - a set of waterslide decals, not a model.
In stock
10.36 €
Artwox ModelAM100061:350

1:350 USS Missouri BB-63 Circa 1991 Deck Masking Shee (For Tamiya 78029)

A masking sheet for the deck of a model of the battleship USS Missouri BB-63 in her state of 1991, in 1:350 scale, for the Tamiya 78029 kit.
In stock
11.16 €
SX-ArtSXA360501:35

1:35 ASLAV-PC Phase 3 holographic film (simulate optical instrument lenses)

1:35 ASLAV-PC Phase 3 holographic film for simulating the optics is an SX-Art accessory set that gives the vision ports, periscopes and headlights of the Australian wheeled carrier the look of real glass.
In stock
5.56 €
AberABR160391:16

1:16 Tiger II Vol.6 - Rear Fenders

Aber 1:16 Tiger II Vol.6 – Rear Fenders is a photo-etched set of rear fenders for a large scale model of the Tiger II heavy tank.
In stock
20.40 €
MASTERSM3500991:350

1:350 USS Alaska/Guam armament - 12in (9pcs), 5in (12pcs)

MASTER 1:350 USS Alaska/Guam is a set of turned metal barrels for refining the artillery armament on a model of the American large cruisers of the Alaska class.
In stock
19.56 €
ELEFANTEL351201:35

1:35 STEEL WHEELS FOR IDF MAGACH 1 - 3, COMPLETE SET WITH 14 WHEELS

Steel wheels for the Magach 1 to 3, a complete set of 14 wheels, 1:35 is a resin accessory from the manufacturer Elefant. It replaces the wheels of a whole running gear; it is not a vehicle kit.
In stock
28.76 €
Art ScaleASKM350061:35

1:35 Sikorsky CH-54A Tarhe one-sided express fit mask for ICM

A single-sided pre-cut Art Scale masking set for the glazing of a model of the Sikorsky CH-54A Tarhe helicopter in 1:35 scale. It shortens the most drawn-out part of painting, the masking of the cockpit.
In stock
10.36 €
Print ScalePRSC480021:48

1:48 Civil war in Spain Part-1 Franco

Print Scale decals Civil War in Spain, Part 1: Franco in 1:48 scale. A set of waterslide decals with the markings of the Nationalist side.
In stock
7.96 €
Plastruct PLT90632

Rectangular Tubing (1 pcs) H-7,9mm W-6,4mm Wall-0,6mm L-375mm

Plastruct rectangular tube (Rectangular Tubing) 7.9 x 6.4 mm is a hollow styrene profile 375 mm long for modeling structures and conversions.
In stock
1.80 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.