1:24 Honda Integra (DC5) TYPE

The real subject

The Integra of the DC5 generation is a three-door coupe with front-wheel drive that Honda built in the first half of the 2000s. The body is low and smooth, with a short rear end and long glazing, so the car looks fast even standing still. Under the hood sat a 2.0-liter inline four-cylinder willing to rev high, thanks to which the type won a reputation as an affordable sports car that can be driven every day.

A car with two names

On the Japanese market the model was sold as the Honda Integra, in North America under the name Acura RSX. It is the same car, which is worth knowing when looking for reference: photographs and color schemes can be found under both designations and they differ mainly in the badges on the grille and at the rear. Thanks to the two names there is considerably more pictorial reference for the build.

Building and painting tips

• Wash the parts in lukewarm soapy water and let them dry; the paint then holds better.
• Smooth the body out before the primer, as every mark of sanding shows on a smooth surface.
• Lay the paint on in thin coats and finish the shine with a clear coat.
• Try the interior and the chassis dry first, so that the body seats without pressure.
• Glue the glazing with a glue for clear parts, as super glue will fog it.
• Leave the badges and fine lettering until last; they settle better over finished paint.

Terms of supply

The kit is supplied unassembled. Paints, glue and varnishes are not included in the package, unless stated otherwise.