1:24 JBW D1 10 + 3D printed Tires

D1 wheels ten inches in diameter completed with printed tires, 1:24 scale. A complete assembly for replacing the wheel parts of a kit.

Scale1:24
Product EAN5791111221648

Responsibility details are not available.

19.16 €
15.83 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A tread pattern that came out of a printer

Printed tires are a fairly recent thing in small scales and it is worth knowing how they differ from molded rubber. Printing manages an open tread pattern and the lettering on the sidewall with a sharpness a mold cannot reach, because nothing has to come out of a mold. The result is hard, though: the tire does not deform, it will not flatten under the weight of the car, and under rough handling it will break rather than bend.

Consequences for building the chassis

Hard tires mean precise but unforgiving geometry. The assembly has a fixed diameter and that determines how high the car will stand; nothing settles. The wheelbase and the axles therefore have to be straight, otherwise one wheel hangs in the air and not even the weight of the body will help it. The recommended procedure is to glue the axles on a flat base, let them set and only then fit the wheels. The reward is a car that stands on all four and does not rock.

Painting and surface

A printed surface often has a fine texture from the individual layers; it can be suppressed with a thin coat of primer and a light polish with the finest paper, but do not overdo it, because under pressure the tread rounds off. The side of the tire takes a matte shade with a touch of gray, while the tread looks better noticeably lighter, because rubber fades where it meets the road. Spray the rim separately and join the parts only once they have dried. Finally a light matte coat over the whole assembly helps, so that the difference between the printed and the cast part is wiped away and the wheel reads as one piece. Anyone building the car into a setting will appreciate that a hard tread takes being pressed into the base without taking an imprint, so the wheel can be set into a layer of dust or onto wet asphalt with no risk of crumpling the sidewall.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It holds a sharper tread pattern and the lettering on the sidewall, but it is hard. It does not deform under the weight of the car and under rough handling it will break rather than bend.

Yes. Hard tires do not settle, so a crooked axle shows up as one wheel not reaching the base.

A thin coat of primer and a very light polish help. It must not be overdone, or the edges of the tread will round off.

It is better to paint them separately and join them only once they have dried. Finally unify the assembly with a light matte coat.

Last seen

Ukrainian Scale Cars Production (USCP)U24P184t1:24

1:24 JBW D1 10 + 3D printed Tires

D1 wheels ten inches in diameter completed with printed tires, 1:24 scale. A complete assembly for replacing the wheel parts of a kit.
In stock
19.16 €
Ukrainian Scale Cars Production (USCP)U24P098st1:24

1:24 Rotiform DIA 20 + Stance tires

Twenty-inch wheel discs of an American cut together with low-profile rubber, put together for models seated tight above the roadway.
In stock
19.16 €
Mr.PaintMRP-A017

MRP-A017 Exhaust Metal

Exhaust Metal is a dark metallic shade for exhausts and heat-affected parts. Water-thinnable Aqua range, pre-thinned.
In stock
3.16 €
Hobby DesignHD07-00861:24

1:24 Exhaust Pipe (dia. 86mm)

Exhaust pipe (86 mm) 1:24 is a detailing accessory from Hobby Design for reproducing the exhaust system of car models faithfully.
In stock
5.56 €
TamiyaTA87189

Panel Line Accent Color - Light Gray

Tamiya Panel Line Accent Color, Light Gray is a ready-mixed enamel wash (light gray) with a brush in the cap for emphasizing panel lines.
In stock
5.16 €
Number FiveN5-C217

Ascona Blue

A Number 5 modeling paint in the shade designated Ascona Blue, from a line named after automotive paints.
In stock
5.96 €
New WareNWAM13631:48

1:48 Yakovlev Yak-7B - BASIC Kabuki Masks (for Zvezda Kits)

The 1:48 Yakovlev Yak-7B masking set at the BASIC level is an accessory to a kit: it contains pre-cut masks, not model parts.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.