1:32 US Army Bomb Trailer Mark 2

A US Army bomb trailer designated Mark 2 in 1:32 scale. An accessory for airfield scenes and for aircraft models in a large scale.

Scale1:32
Manufacturer Thunder Model
Product EAN8591111220538

Responsibility details are not available.

14.76 €
12.20 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

Bomb trailers were part of the airfield equipment that no bomber or fighter unit could do without. A low cart with a load bed and a drawbar for a tractor carried bombs from the dump all the way under an aircraft, where the load was hoisted from it into the racks. It is carts like these that turn a model of an aircraft into a scene: the machine alone on a board looks static, whereas a trailer by the wing suggests that it will be flying shortly.

What the set offers

The set brings the trailer designated Mark 2 in 1:32 scale, that is in a size where the wheels, the frame and the small fittings are all clearly legible. The extent of the set and the number of parts are given in the manufacturer's instructions. In a large scale it pays to work the trailer into the action: set at an angle under a wing, with the drawbar turned, it looks livelier than parked parallel to the fuselage.

Building and painting tips

  • Cut the excess material off with a sharp blade a little away from the part and sand the remainder, so that the frame sits straight.
  • The parts are not polystyrene, so super glue will join them; wash and degrease them before painting.
  • Assemble the frame and the wheels on a flat surface, otherwise the cart will stand crooked and it will show at once.
  • Choose the colors according to the references for the scene you are building.
  • Credibility comes from a dusted underside, worn edges to the load bed and discreet oil traces at the wheel hubs.

Who it is for

For builders of airfield scenes in a large scale who have a finished aircraft but no surroundings for it, and for those who like adding the equipment that appears in photographs but not in the box with the kit. Paints and glue are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

For moving bombs around an airfield from the dump to an aircraft, from where the load was hoisted into the racks. The cart was towed by an airfield tow tractor on its drawbar.

The extent of the set and the number of parts are given in the manufacturer's instructions. The name gives the trailer, so do not count on any further load in advance.

They are not polystyrene, so cement for plastic will not help. Use super glue and wash and degrease the surfaces beforehand.

A scene with any model in 1:32 scale. It is general airfield equipment, not an accessory for a single type of aircraft.

Last seen

Thunder ModelTH320021:32

1:32 US Army Bomb Trailer Mark 2

A US Army bomb trailer designated Mark 2 in 1:32 scale. An accessory for airfield scenes and for aircraft models in a large scale.
In stock
14.76 €
ReskitRS32-04811:32

1:32 AIM-9L Sidewinder missiles (4 pcs)

Reskit 1:32 AIM-9L Sidewinder (4 pcs) is a resin, 3D-printed set of four guided air-to-air missiles for the detailed armament of fighter models.
In stock
17.16 €
KelikRSK48-01661:48

1:48 Spitfire TR.9 - interior 3D decals for Airfix kit

The interior equipment of the two-seat Spitfire TR.9 trainer in color printing with relief. It holds the equipment for both seats placed one behind the other. The cutting matches the plastic parts of the Airfix kit.
In stock
13.16 €
Advanced ModelingAMPC-48107-11:48

1:48 Hydraulic jacks with traverse

Hydraulic jacks with a traverse, 1:48 are a resin set of ground support equipment from Advanced Modeling. It is not an airplane model but an accessory for a maintenance diorama, with a cross beam under the airframe.
In stock
6.76 €
Advanced ModelingAMC-481001:48

1:48 ASh-62 IR Radial piston engine

ASh-62 IR — a radial piston engine in 1:48 is a resin detail set from the brand Advanced Modeling. It is not an airplane kit but a separately cast engine for refining the engine section or for a maintenance diorama.
In stock
6.76 €
77propellerPRP7031:48

1:48 MIG-21 LADDER WITH CHOCKS

The 3D-printed set 77propeller MiG-21 ladder with wheel chocks (1:48) - a diorama accessory for boarding the cockpit and securing the wheels on a model of the MiG-21 fighter.
In stock
9.96 €
KelikRSK48-01891:48

1:48 A6M2b Zero - interior 3D decals for Academy kit

A set of color three-dimensional decals for the cockpit of the Japanese A6M2b Zero carrier fighter in 1:48 scale. It is intended for the Academy kit.
In stock
11.16 €
Advanced ModelingAMC-481071:48

1:48 Hydraulic jack (2 pcs.)

A hydraulic jack, 2 pieces, 1:48 is a resin set of ground support equipment from Advanced Modeling. It is not an airplane model but an accessory for a diorama of maintenance and parked hardware.
In stock
5.56 €
Magic FactoryMF75061:48

1:48 P&W R2800

Magic Factory Pratt and Whitney R-2800 engine (1:48) is a detailed resin and 3D-printed set of the Double Wasp radial engine for refining American aircraft in 1:48 scale.
In stock
32.76 €
ReskitRS72-01701:72

1:72 A-3 Skywarrior wheels set

Reskit - a resin wheels set for the Douglas A-3 Skywarrior in 1:72 scale . Replacement wheels with a faithful tread and hub detail, an accessory for refining the landing gear, not a standalone model.
In stock
9.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.