1:350 USS New Jersey BB-62 - an Artwox Model wooden deck is a self-adhesive veneer with pre-printed plank laying for the deck of a battleship.
Responsibility details are not available.
An accessory from the brand Artwox Model, not a kit. The package holds a thin wooden veneer with a self-adhesive backing and pre-printed deck plank laying, which is glued onto the plastic deck of the model. The set is cut for one particular kit, Very Fire VF350911; before ordering, check that you have the same one.
A molded deck has its planks marked by an engraved line. In 1:350 scale that line is necessarily deeper and wider than reality would call for, and after spraying it is partly filled with paint as well. The result then comes across as one flat area with a regular pattern. Veneer solves the problem differently: the texture is given by the material itself, so light reflects off the surface unevenly and the deck gains a depth that paint on plastic only simulates. The irregularity of the growth rings also creates a natural spread of shades between planks that is hard to imitate with a brush.
The whole effect rests on a flat, clean base. Degrease the plastic, let it dry and check that no ejector marks are left on the deck. Peel the covering film off in sections and lay the veneer from the middle out to the edges, so that no air is closed in under it. Do not varnish the surface over with a strongly glossy varnish, as that emphasizes the stuck-on look and the texture disappears. The ideal is a thin coat of matte varnish applied with an airbrush from a greater distance.
This is an accessory for a plastic kit. The model and the paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!