A set with a wooden deck, a masking sheet and photo-etched parts for the model of the destroyer Z-43 from 1944 in 1:700 scale. The more complete variant of the deck treatment. The target kit is the Trumpeter 05789.
Responsibility details are not available.
The most extensive of the deck treatments that Artwox Model offers for the destroyer Z-43 in 1944. The name names three components: the wooden surface, the masking sheet and a photo-etched element for indicating the planks. Anyone who wants the deck of a small hull finished including the fine grain of the seams will reach for this variant rather than for the separate film. The cut is calculated for the Trumpeter 05789 kit.
The group to which Z-43 belonged arose as a reaction to the experience from Narvik and from the Arctic convoys: the designers stepped back from heavy guns on the bow, because the ship lost stability in a rough sea and the forward mount became unusable. Lighter and faster-loading armament supplemented by anti-aircraft barrels took their place. Z-43 served on the Eastern Front at sea, where until the end of the war she supported ground units with fire from her broadside and escorted transports carrying refugees.
First finish and paint the hull, and only then seat the surface. Attach the photo-etched part with a thin layer of cyanoacrylate glue applied with a wooden stick, so that the excess does not run into the structure. Leave the masking to the very end, because otherwise dust from sanding easily gets under the edge. Before the final bringing out of the detail, try the strength of the tone on an offcut.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!