1:72 Hawker Tempest Mk.V wheels LATE

The resin set 1:72 Hawker Tempest Mk.V wheels LATE from the Brengun brand offers the main wheels of the Tempest fighter in the late production guise. It is an accessory to a kit in 1:72 scale, not a model of the aircraft.

Scale1:72
Manufacturer Brengun
Product EAN8591111000000

Responsibility details are not available.

7.56 €
6.25 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:72 Hawker Tempest Mk.V wheels LATE — Brengun resin wheels

Cast resin wheels for a kit of the British Hawker Tempest Mk.V fighter in 1:72 scale, this time in the late guise. The set replaces plastic parts of the landing gear; the aircraft itself is not in the package. The advantage of resin is plain with wheels: a casting has no parting line running across the tread of the tire, so the most unpleasant part of cleaning up falls away, and the hub keeps its sharp edges. The manufacturer is the Czech brand Brengun, which also makes a set with the early variant of the wheels for the same type.

The real subject

The Tempest Mk.V came out of the Typhoon type, but was given a new wing with a thinner profile and a longer nose because of the move of the radiator. It was powered by the Napier Sabre H-24 engine and the armament was made up of four 20 mm cannon. The aircraft served from 1944 especially at low altitudes — in chasing V-1 missiles and in the role of an attack machine over northwestern Europe. The main landing gear retracted into the wing and in the course of production and service the design of its wheels changed, so choosing the right variant is one of the details that set a model matching a particular machine apart from a general one.

Usage tips

Before gluing, wash the parts in lukewarm water with detergent. Cut the casting block off with a saw and level the contact surface on sandpaper laid on a flat board, so that the model stands on both wheels once finished. Do the sanding wet and with respiratory protection. It is glued with cyanoacrylate glue — plastic cement will not take on resin. Paint the hub and the tire separately and mark the border out with masking tape or a circular template. A final fine dusting with pigment on the contact surface gives the wheel the impression of a machine in use.

Who the set is for

  • Modelers building the Tempest Mk.V in the late production guise in 1:72 scale
  • Those who want wheels without a parting seam and with sharper detail on the hub
  • Builders who watch the agreement of details with a particular machine
  • Anyone interested in a quick improvement of the landing gear without rebuilding the rest of the model

It is an accessory to a kit, not a model in its own right. The kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the machine you are building. The design of the wheels on the Tempest changed during production and both variants are made as separate items.

The set replaces the wheels of the landing gear. Whether it holds further parts as well is stated on the box.

With cyanoacrylate glue. Ordinary plastic cement will not bite into resin and the joint would not hold.

Yes. There tends to be a residue of release agent from the mold on a casting, and neither paint nor primer would hold on it.

Last seen

BrengunBRL722611:72

1:72 Hawker Tempest Mk.V wheels LATE

The resin set 1:72 Hawker Tempest Mk.V wheels LATE from the Brengun brand offers the main wheels of the Tempest fighter in the late production guise. It is an accessory to a kit in 1:72 scale, not a model of the aircraft.
In stock
7.56 €
Aires/QuickboostQB481141:48

1:48 P-38M Lightning gun barrels

Quickboost 1:48 P-38M Lightning gun barrels is a resin detail set that replaces the plastic barrels of the nose with faithful parts with drilled-out mouths.
In stock
4.76 €
SBS ModelSBS480171:48

1:48 Macchi C 202 Folgore cockpit set

An accessory set in 1:48 scale for refining the cockpit of the Italian fighter Macchi C.202 Folgore.
In stock
15.16 €
SBS ModelSBS480121:48

1:48 Macchi C205 Veltro cockpit set

A resin set for the pilot area of a model of the Italian Macchi C.205 Veltro fighter in 1:48 scale. It replaces the standard cockpit fit with parts with crisper detail.
In stock
15.16 €
Hobby BossHB855191:35

1:35 M911 C-HET w/m747 Heavy Equipment Semi-Trailer

The M911 C-HET with the heavy M747 semitrailer in 1:35 scale from Hobby Boss, an injection-molded plastic kit of the American heavy tank transporter tractor including the trailer. The finished rig is among the longest models that can be built in 1:35.
In stock
77.56 €
Special MaskM720311:72

1:72 A.W. Meteor NF Mk.11/12/13 MASK

Mask 1:72 A.W. Meteor NF Mk.11/12/13 is a die-cut masking set for the canopy glazing of the night fighter. An accessory for the build, not a kit.
In stock
4.36 €
77propellerPRP062

Set F – 3 X Luftwaffe WWII Shingles Camo STENCIL

The 77propeller Set F - 3 masking stencils for Luftwaffe shingles camouflage , made of flexible plastic for spraying the scale-like (shingle) mottling with an airbrush.
In stock
17.96 €
GunzeH330

Hobby color - tmavě zelená BS381C/641

A dark green shade to the British standard. The upper surfaces of Royal Air Force machines and of Commonwealth vehicles.
In stock
3 €
TrumpeterTR003691:35

1:35 German Panzerjagerwagen Vol.2

1:35 German Panzerjagerwagen Vol.2 is a plastic kit of the German armored railway car with a tank turret. It is released by Trumpeter.
In stock
28.76 €
AberABR35L371

produkt-ABR35L371

In stock
15.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.