Imitations of screws with a round head and an internal hex in the 0.5 mm size. A small accessory for modelers who want the fasteners on a model to match the real subject.
Responsibility details are not available.
The set carries small imitations of screws with a round head and an internal hex, that is with the type of head commonly called an Allen head. The size of the element is 0.5 mm, which is a value at the edge of what can still be comfortably gripped with tweezers. It is neither a kit nor a model in its own right, but an accessory for a finished part.
On a real machine the kind of fastener differs from place to place, and modelers who build from photographs of the real subject notice it. That is exactly why these elements make up a whole line in which the individual items differ in the shape of the head, in the way it is driven and in size. This item covers the round head with an internal hex; anyone who needs another type of head or another size will reach for another item of the same line.
Work over a light-colored pad with a rim and carry the elements with fine-tipped tweezers. Drill the hole for seating with a micro drill bit in a hand-held pin vise, not in a fast drill, otherwise the bit will slide in the thin plastic. Dose the glue drop by drop on the tip of a pin, because even a small excess will flood the relief of the head. Degrease the elements before painting and apply the paint in thin layers.
The set is for modelers who take the detail all the way and have tweezers, a magnifier and a fine drill at hand. What is sold are these elements only; a kit, paints and glue are not part of it, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
