An accessory for a model of the F-16 fighter of blocks 40 to 52 in 1:32 scale. It is meant for completing a kit, not for building a model on its own.
Responsibility details are not available.
The General Dynamics F-16 is a single-engined multirole combat aircraft and the most widespread Western fighter of its generation. Machines of production blocks 40 to 52 are among the later and more capable forms, equipped among other things for night attack and for the suppression of ground air defenses. The differences between the individual blocks show in a whole range of external details, which matters to the modeler: a part that fits one block need not match another.
An accessory for an F-16 model in 1:32 scale, meant for completing a kit. You cannot build a model on its own from it. The parts are not polystyrene, cement for plastic has no effect on them and they are joined with super glue. Cut the excess material off with a sharp blade a little way from the part and sand the cut down; wash and degrease the parts before painting. The particular contents of the set, the placement of the parts and the recommended procedure are given in the manufacturer's instructions.
First check that your kit matches one of the blocks 40 to 52, because the early F-16 versions differ in a number of details. Dry-fit the parts until they sit without pressure, and only then glue them. Dose the super glue with the tip of a toothpick, as any excess in a visible place turns white. A primer coat holds on the parts considerably better than paint applied straight to the bare material.
The aircraft kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
