A light blue modeling shade under the designation MS Light Blue in a bottle with a volume of 10 ml. It belongs to the branch of paints for Gundam kits.
Responsibility details are not available.
A light blue shade in a bottle with a volume of 10 ml. It belongs to the branch of paints for Gundam kits, where light blue tones serve on the large areas of the torso and the limbs. The volume is enough for several smaller models, and if you thin the paint for an airbrush it will last longer still.
Shake the bottle thoroughly before use. The pigment sinks to the bottom and badly mixed paint covers unevenly and dries into blotches. For an airbrush, thin the paint with the thinner the manufacturer recommends for this line and apply it in two or three thin coats with a short pause to set. Do not mix thinners of different systems in one coat, as the surface then grains and hardens badly.
A light blue covers slowly on dark plastic, so put a light base coat under it, best of all white or light gray. Wash and degrease the parts before painting, as a fingerprint will show under the coat as a matte patch. First varnish the area the decals will go onto with gloss varnish. On a glossy surface a decal settles with no air bubbles and leaves no visible edge of carrier film behind.
The package contains one bottle of paint. Thinner, brushes, an airbrush and kits are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
