July

1 114 products
Product filtering
up to €
OmaskOMK90008

Copper wire 0,7 mm (lenght 50 cm)

Omask copper wire 0.7 mm (length 50 cm) is a flexible copper wire for faithful wiring runs and for detailing models.
Currently unavailable
2.36 €
OmaskOMK90007

Copper wire 0,8 mm (lenght 50 cm)

Omask copper wire 0.8 mm (50 cm long) is a flexible copper wire for faithful cable runs and detailing on models.
In stock
2.36 €
OmaskOMK90006

Copper wire 0,9 mm (lenght 50 cm)

Copper wire 0.9 mm in diameter and 50 cm long. A soft material for grab handles, lines, antennas and the pins of moving joints.
In stock
2.36 €
OmaskOMK90005

Copper wire 1,0 mm (lenght 50 cm)

Omask copper wire 1.0 mm (50 cm long) is a flexible copper wire for faithful cable runs and for detailing models.
In stock
2.36 €
OmaskOMK772401:72

1:72 Vickers Valiant wheel bay plugs (for Airfix)

Omask Vickers Valiant 1:72, masking plugs for the landing gear bays , cover the landing gear bays of the model reliably while the paint is sprayed. It is intended for the Airfix kit.
In stock
4 €
OmaskOMK570481:72

1:72 TIE Advanced x1 double-sided mask (for Bandai/Revell)

Omask TIE Advanced x1 1:72 - a double-sided masking set makes it possible to spray the glazing frames and the panels of the advanced TIE fighter cleanly from both sides. The target kits are Bandai and Revell.
In stock
5.16 €
OmaskOMK570471:72

1:72 TIE Fighter double-sided mask (for Bandai/Revell)

Omask TIE Fighter 1:72 - a double-sided masking set makes it possible to spray the glazing frames and the panels of the TIE fighter cleanly from both sides.
In stock
5.16 €
OmaskOMK570461:72

1:72 X-wing Starfighter double-sided mask (for Bandai/Revell)

Omask 1:72 X-wing Starfighter double-sided mask is a double-sided masking set for the cabin glazing of the X-wing fighter for Bandai and Revell kits in 1:72 scale.
In stock
4.36 €
OmaskOMK748941:48

1:48 Tempest Mk.II wheelbay plugs (for Eduard)

Omask 1:48 Tempest Mk.II, landing gear bay plugs (for Eduard) are shaped foam plugs that seal the landing gear bays of a model for the duration of spraying. It is not a kit ; you have to have the Tempest Mk.II model from Eduard.
Currently unavailable
3.20 €
OmaskOMK772391:72

1:72 Hawker Hurricane Mk.I wheel bay plugs (for Airfix)

Hawker Hurricane Mk.I wheel bay plugs 1:72 are shaped inserts that protect the inside of the wheel bays of the Airfix kit from paint while spraying.
In stock
3.20 €
OmaskOMK570451:72

1:72 Hawker Hurricane Mk.I mask (for Airfix)

Omask 1:72 Hawker Hurricane Mk.I mask is a masking set for a model of the British fighter of the Battle of Britain. It is an accessory for painting, not a model.
In stock
5.16 €
OmaskOMK570441:72

1:72 Supermarine Walrus mask (for Matchbox/Revell)

The Supermarine Walrus painting mask 1:72 gives accurate and clean painting of the glazing frames of a model of this British flying boat. Intended for Matchbox and Revell kits.
In stock
5.16 €
OmaskOMK540701:48

1:48 Ka-52 Alligator double-sided mask (for Zvezda)

The Ka-52 Alligator double-sided painting mask 1:48 makes it easy to paint the canopy glazing of the attack helicopter model accurately from both sides.
In stock
7.16 €
OmaskOMK772381:72

1:72 P-51D Mustang wheel bay plugs (for Eduard)

Omask masking plugs for the wheel bays of the P-51D Mustang in 1:72 scale are shaped plugs for clean masking of the bays while spraying the Mustang model from Eduard.
In stock
3.20 €
OmaskOMK772371:72

1:72 F-4 Phantom wheel bay plugs (for Finemolds)

Omask masking plugs for the landing gear bays of the F-4 Phantom in 1:72 scale are shaped plugs for clean masking of the bays while the Finemolds Phantom model is sprayed.
In stock
3.20 €
OmaskOMK748931:48

1:48 F/A-18E / F / EA-18G wheelbay plugs (for Meng)

Omask masking plugs for the landing gear bays of the F/A-18E/F and EA-18G in 1:48 scale are shaped plugs for clean masking of the bays when spraying the Super Hornet and Growler model from Meng.
In stock
4 €
OmaskOMK748921:48

1:48 A-10C Thunderbolt II wheelbay plugs (for GWH)

Omask 1:48 A-10C Thunderbolt II, landing gear bay plugs (for GWH / Great Wall Hobby) are shaped foam plugs that seal the landing gear bays perfectly for the duration of spraying. It is not a kit , so you have to own the GWH A-10C model.
In stock
3.20 €
3DF3DF1072201:72

1:72 Fug 16ZY antenne (3D print)

FuG 16ZY antenna 1:72 (3D print) is a fine 3D-printed part of the lower antenna of the onboard radio of German aircraft of the Second World War from the 3DF brand. It is a detail set, not an aircraft model.
In stock
3.56 €
OmaskOMK800911:72

1:72 P-51 D invasion stripes 18 inches - yellow mask (for Eduard)

P-51D invasion stripes 18 inches, yellow mask 1:72 is a set of painting masks for spraying the wide invasion stripes on a Mustang model cleanly.
In stock
6.76 €
OmaskOMK800901:48

1:48 P-51 D invasion stripes 18 inches - Oramask (for Eduard)

P-51D invasion stripes 18 inches - Oramask 1:48 is a set of painting masks in Oramask vinyl film for spraying the invasion stripes onto a Mustang model cleanly. Meant for the Eduard kit.
In stock
6.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.