Wheels for the HMMWV Humvee 1:72 are a 3D printed resin set from the brand Special Hobby that replaces the plastic wheels of the model of the American cross-country vehicle with more faithful parts, including the spare. It is not a standalone model. Intended for the Dragon kits.
The early-type RSO towing pintle in 1:35 (2 pieces) is a resin detail set from Special Hobby for a model of the German Raupenschlepper Ost tracked tractor. It is not a stand-alone model.
RSO (Raupenschlepper Ost) road wheels 1:35 are a resin 3D-printed set from Special Hobby that replaces the plastic wheels of a model of this German tracked tractor with more faithful parts. It is not a model in its own right.
The gun travel lock for the 7.5 cm Pak 40/4 on the RSO chassis in 1:35 is a resin detail set from Special Hobby that adds the front and rear barrel rest in the travel position to a model of the self-propelled gun. It is not a standalone model.
The BSA M20 correction set in 1:35 from Special Hobby brings 3D-printed resin parts that raise the Tamiya kit of the British military motorcycle to display quality. It is not a stand-alone model.
A metal 120 mm L/55 gun barrel for the Leopard 2A7V — a turned metal gun barrel in 1:48 scale from the Polish maker Aber for the model of the modern German Leopard 2A7V tank (Tamiya kits). It is not a model but a part for a kit that you have to have.
A metal barrel for the 122 mm D-30 howitzer — a turned metal gun barrel in 1:35 scale from the Polish maker Aber for the Soviet D-30 howitzer (and for the Syrian T-34). Made for the Trumpeter and RFM kits. It is not a model but a part for a kit that you have to have.
A metal 122 mm D-25T L/43 gun barrel for the IS-3 — a turned metal gun barrel in 1:35 scale from the Polish maker Aber for the model of the Soviet IS-3 heavy tank (Tamiya and Trumpeter kits). It is not a model but a part for a kit that you have to have.
MASTER 1:35 German 5 cm Pak 38 gun barrel is a turned metal replacement barrel for a model of the anti-tank gun in 1:35 scale. It brings a real bore and a perfectly straight axis, which are hard to achieve on a plastic part.
A resin replacement engine cowling for the F6F-3 Hellcat — the early version with closed cooling flaps in 1:48 scale from Quickboost (Aires) for the Hasegawa kit. It is not a model but a detail part for a kit.
Cessna A-37 Dragonfly — pylons (weapon pylons) in 1:48 scale from the resin detail maker Aires. An accessory for the Trumpeter plastic kit, not a standalone model.
FineMolds 1:72 IJN Zero, 20 mm cannon barrels and pitot tube , are genuine metal replacement parts from FineMolds for their own Zero models; it is not a kit . The barrels have a real bore, and the pitot tube, unlike the plastic one, will not snap off.
Pilot's Seat for the Bf 109E with Separate Belts, 1:48 — a 3D-printed (resin) pilot's seat from 3DF for the Messerschmitt Bf 109E Emil kit from Eduard. It is not an airplane model, but a detail add-on for the kit.
3DF 1:48 Seat for Fw 190A/F with separate belts is a 3D-printed resin seat with separate seatbelts — an aftermarket detail for the cockpit of the Focke-Wulf Fw 190 fighter, not a model.
Ural 4320, BM-21 Detailing set is a set of 3D-printed resin detail parts from Quinta Studio in 1:35 scale for refining and equipping the Zvezda plastic kit. It is not a model but an accessory for one particular kit.
JGSDF Mitsubishi Type 73 Shin — Detailing set is a set of 3D-printed resin detail parts from Quinta Studio in 1:35 scale for refining and equipping the plastic Trumpeter kit. It is not a model but an accessory for one specific kit.
KrAZ-214B/255B - floor mat 1:35 (Quinta Studio) is a color 3D-printed part representing the cab floor mat for the plastic KrAZ-214B and KrAZ-255B kits from Roden. It is applied like a decal and gives the cab accurate detail without painting.
GAZ-66, floor mats and mudguards 1:35 (Quinta Studio) is a set of colored 3D-printed accessories (mats for the cab and mudguards) for the plastic GAZ-66 kit from the maker Zvezda. They are applied like a decal and raise the fidelity of the detail with no painting.
A 3D-printed colored interior for the JGSDF Mitsubishi Type 73 Shin (for the Trumpeter kit), the Small version is a set of pre-colored cab parts on a decal backing in 1:35 scale from the brand Quinta Studio. It is not a model but an accessory for one particular kit.
With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:
Always active
Necessary cookies
These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.
Analytical cookies
They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.
Marketing cookies
They collect information to better tailor advertising to your interests, both on and off this website.
To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.