1:32 positive rivets are close to compulsory in the big scale, because the eye goes looking for rows of raised heads whether you provide them or not. Loose rows for cutting to length sit alongside shaped 3D segments with stated head diameter and pitch, plus sheets for particular types. They are applied like a decal, so nothing is scribed or sanded away.
1:32 Single riveting rows
10.40 €
Single riveting rows (rivet size 0.20 mm, gap 0.8 mm, suits 1/32 scale), Black color, total length 5,8 m/19 ft
10.36 €
Single riveting rows (rivet size 0.20 mm, gap 0.8 mm, suits 1/32 scale), White color, total length 5,8 m/19 ft
10.36 €
1:32 Double riveting rows (rivet size 0.20 mm, gap 0.8 mm), Black color, total length 5,8 m/19 ft
10.36 €
1:32 Double riveting rows
10.40 €
1:32 Double riveting rows (rivet size 0.20 mm, gap 0.8 mm), White color, total length 5,8 m/19 ft
10.36 €
Riveting at this size tells most on 1:32 aircraft model kits, where the heads are visible without magnification. The rules for choosing pitch, and the full application sequence, are set out in positive rivets for model aircraft. A fine wash from weathering products then draws the raised surface out best.