Build

2 401 products
Product filtering
up to €
BOLTBolt209

BOLT UP FF Accelerator - spray 59,2 ml

BOLT UP FF Accelerator (spray, 59.2 ml) is an accelerator for super glues that speeds up the curing of cyanoacrylates in spray form.
In stock
7.96 €
BOLTBolt208

BOLT UP Accelerator - spray 59,2 ml

BOLT UP Accelerator is an activator (accelerator) for cyanoacrylate glues in a spray of 59.2 ml from the brand BOLT, which makes the joint cure instantly.
In stock
7.16 €
BOLTBolt356

Shock Bolt Medium-vteř.l.pružné střední 7,1g

Shock Bolt Medium is a flexible medium-viscosity super glue from BOLT in a 7.1 g size - the joint takes shocks and a slight flexing.
In stock
3.56 €
BOLTBolt351

Shock Bolt Thin-vteř.l.pružné řídké 14,2g

BOLT Shock Bolt Thin is a thin flexible super glue (cyanoacrylate) in a 14.2 g package, resistant to impact and vibration. This is a modeling chemical product, not a kit.
In stock
4.76 €
BOLTBolt350

Shock Bolt Thin-vteř.l.pružné řídké 7,1g

BOLT Shock Bolt Thin is a thin flexible super glue (cyanoacrylate) resistant to impact and bending. It flows into tight joints by capillary action and sets quickly. A 7.1 g package.
In stock
3.56 €
BOLTBolt334

Bolt Thick (vteřinové lepidlo husté) - štěteček 7,1g

Bolt Thick is a thick super glue from BOLT in a 7.1 g size with a brush in the cap - it fills a seam and gives time to seat the part.
In stock
3.96 €
BOLTBolt333

Bolt Thick (vteřinové lepidlo husté) 7,1g

BOLT Bolt Thick 7.1 g is a thick super glue (cyanoacrylate, CA) of high viscosity — it fills larger gaps, does not run and gives more time to line the parts up.
In stock
3.16 €
BOLTBolt323

Bolt Medium (vteřinové lepidlo střední) 7,1g

BOLT Bolt Medium 7.1 g is a medium-viscosity super glue (cyanoacrylate, CA): universal, it gives more time to align and it fills small gaps.
In stock
3.16 €
BOLTBolt300

Hot Bolt Ultra Thin (vteřinové lepidlo ultra řídké) 14,2g

BOLT Hot Bolt Ultra Thin 14.2 g is a very thin super glue (cyanoacrylate, CA) which flows into tight seams by capillary action and sets in a flash.
In stock
5.56 €
Master ToolsMT09986

Precision Hobby Pin Vise Set (0.3-1.2mm)

The Precision Hobby Pin Vise Set 0.3 to 1.2 mm is a hand chuck from Master Tools for drilling small holes precisely in plastic, resin and photo-etched parts, and that without electric power.
In stock
16.76 €
RevellRE39080

Panel Line Engraver

The Revell Panel Line Engraver is a modeling tool for engraving and restoring engraved panel lines on plastic models.
In stock
12.76 €
JH modelsJHBR9

Tvarová brousítka Sada A1 – A5 / 9 mm

JH models shaped sanding sticks, set A1 to A5, width 9 mm is an assembly of five shaped sanding sticks in a wider version for work on larger surfaces.
In stock
23.16 €
JH modelsJHBR7

Tvarová brousítka Sada A1 – A5 / 7 mm

JH models shaped sanding sticks, set A1 to A5, width 7 mm is an assembly of five shaped sanding sticks for sanding in the less accessible places of a model.
In stock
22.36 €
Fluorescent Orange Finish-25 %Stock ClearanceFavorite
HasegawaHATF6

Fluorescent Orange Finish

A modeling item in a fluorescent orange shade, that is in a signal color for warning and highly visible surfaces.
3 left
13.16 €9.88 € You save 3.28 €
HaulerHQT014

Super glue aplicator for modellers knife holder

The Hauler super glue applicator for a modeling knife holder consists of photo-etched tips that are held in the handle of a knife and serve for applying glue precisely.
In stock
7.96 €
HaulerHQT011

stainless super glue aplicator

The Hauler stainless super glue applicator is a fine photo-etched tool for applying cyanoacrylate glue precisely to small parts.
In stock
15.56 €
HaulerHQT009

stainless saw for scalpel holder nr.4 (big)

A stainless modeling saw for the No. 4 scalpel handle from the maker Hauler is a tool for the precise separation of plastic, resin and metal parts with a minimal width of cut.
In stock
8.40 €
TamiyaTA741501:12

Modeling Template (Round, 1-12.5mm)

Modeling Template (Round, 1-12.5mm) is a stainless steel template with a row of circular holes for scribing and cutting accurate circles.
In stock
7.16 €
MilliputMILL8574

Milliput TURQUOISE BLUE

Milliput Turquoise Blue is a two-part epoxy modeling putty that cures to a turquoise blue color. It is not a paint but a shaping and filling material.
In stock
9.16 €
GunzeGT101

Mr. ALMIGHTY CLIP STICK MINI(36pcs)27mm

Gunze Mr. Almighty Clip Stick Mini is a set of 36 mini clips on sticks (27 mm clip) for holding small parts while spraying and drying without touching them with your fingers.
In stock
15.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.