Precision Masking Tape 1mm x 18m

Hobby 2000 Precision Masking Tape 1 mm x 18 m is a very narrow straight masking tape of the Precision range, for glazing frames, thin camouflage demarcation lines and narrow stripes. A modeling tool, not a kit.

Manufacturer Hobby 2000
Product EAN8591111000000

Responsibility details are not available.

1.56 €
1.29 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Precision Masking Tape 1 mm x 18 m (Hobby 2000)

Precision Masking Tape 1 mm x 18 m from Hobby 2000 is a modeling tool, not a kit: it is a roll of self-adhesive masking tape for painting models. It falls into the Precision range: it is a straight, accurate tape for straight lines and sharp edges. The width of 1 mm is very narrow and tends to be the first choice for glazing frames (canopies, windows, windshields), thin demarcation lines of camouflage schemes and narrow stripes and edgings. The roll holds 18 m.

How it differs from ordinary sticky tape

The difference is in the adhesive and in the edge. Modeling tape has little tack, and that is deliberate: it holds enough to keep paint from getting under it, but not so much that it pulls away sprayed paint or primer when removed. The edge is sharply cut, so the transition between shades is sharp and free of jagged edges. Once peeled off, no adhesive residue is left.

Beware of confusing the ranges: Precision against For Curves

This tape is from the Precision range and is straight. On a curve it will wrinkle into ripples and paint will bleed under it. If you need to follow an arc, a curve or a rounded transition, Hobby 2000 has a separate range, Masking Tape For Curves, a flexible and stretchable tape that can be bent into an arc without wrinkling. The two ranges complement each other.

Use

  • Glazing and canopy frames, where you want a sharp thin line.
  • Thin demarcation lines between camouflage colors and narrow stripes on a fuselage or a body.
  • Bounding the edge of an area before airbrushing as well as before brushwork.
  • Once the tape is down, press it with the edge of a fingernail or a toothpick, above all along the edge that the paint will meet.
  • Take it off slowly, at a sharp angle back over itself, not perpendicular to the model.

Who it is for

For modelers who spray camouflage and need fine but easily controlled masking. Even thinner is 0.75 mm for micro-masking; more universal for ordinary edges and canopy frames is 2 mm; wider frames and transitions are better handled by 3 mm.

A painting tool, not a kit. Paints, thinners and the model are not included in the package. Apply it to a painted surface only after the paint has cured and test the adhesion on a hidden spot to be safe.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, a straight Precision tape wrinkles on an arc and paint bleeds under the ripples. For curves use the separate Masking Tape For Curves range from Hobby 2000, which is flexible and can be stretched into an arc without wrinkling.

For thin glazing frames yes, and that is where 1 mm is most often used. If the frames are more substantial or you want to lay the tape down more comfortably with fewer joins, 2 mm will be more practical. For really hairline lines, on the other hand, reach for 0.75 mm.

Modeling tape has a low, controlled tack precisely so that it will not pull off cured paint or primer. Even so, let the layer underneath dry through properly, do not press the tape onto the surface more than necessary and peel it off slowly at a sharp angle.

Last seen

Hobby 2000H2K80001

Precision Masking Tape 1mm x 18m

Hobby 2000 Precision Masking Tape 1 mm x 18 m is a very narrow straight masking tape of the Precision range, for glazing frames, thin camouflage demarcation lines and narrow stripes. A modeling tool, not a kit.
In stock
1.56 €
MAiMMAIM241651:24

1:24 Muscle Man sitting + drinking beer

1:24 Muscle Man sitting, drinking beer is a figure of a muscular man sitting and drinking beer, from the manufacturer MAiM in 1:24 scale, a civilian snapshot made for a relaxed scene.
In stock
27.96 €
MAiMMAIM242501:24

1:24 Who was that?

A figure in 1:24 scale offered under the name Who was that. Judge who the figure represents from the illustration from the manufacturer.
In stock
31.16 €
MAiMMAIM242121:24

1:24 Concrete Mixing Machine plus Construction Workers

A concrete mixer with construction workers in 1:24 scale from the manufacturer MAiM joins diorama equipment with figures. The set makes up a ready scene from a building site, not a vehicle kit.
In stock
73.16 €
MAiMMAIM242201:24

1:24 Bear catches a fish

A bear catching a fish in 1:24 scale from the manufacturer MAiM is an animal figure for nature dioramas. It captures a moment of hunting at the water and makes a striking main feature of a scene.
In stock
39.96 €
MAiMMAIM242111:24

1:24 Construction Worker with Back pain

A construction worker with back pain in 1:24 scale from the manufacturer MAiM is a single figure caught at the moment of straightening up and clutching the small of his back. An accessory for construction and workshop dioramas.
In stock
21.96 €
Mini Craft CollectionMCC48521:48

1:48 A-10C Probe refueling adapter

A resin adapter for probe refueling on the A-10C in 1:48 scale . A small accessory for the nose of the model that captures a recent service modification of the attack aircraft.
In stock
8.36 €
MAiMMAIM241691:24

1:24 Muscle Man posing

1:24 Muscle Man posing is a figure of a muscular man posing, from the manufacturer MAiM in 1:24 scale, a self-confident bodybuilding pose for beach, gym and street scenes.
In stock
16.76 €
MAiMMAIM242421:24

1:24 Beduine

A Bedouin in 1:24 scale is a civilian figure from the German brand MAiM intended for dioramas on Middle Eastern and desert themes.
In stock
21.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.