1:72 Twin store carrier w/ BD3-USK racks & B13L

1:72 Twin store carrier w/ BD3-USK racks & B13L

17.96 €
Add to Cart

1:72 Twin store carrier w/ BD3-USK racks & B13L

A twin store carrier with BD3-USK racks and B13L rocket pods, 1:72 is a resin set of underwing armament from Advanced Modeling. It is not an aircraft model but a complete store ready to supplement one.

Scale1:72
Manufacturer Advanced Modeling
Product EAN8591111630610

Responsibility details are not available.

17.96 €
14.84 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A twin store carrier with BD3-USK racks and B13L rocket pods in 1:72 scale (Advanced Modeling)

This item is a detail set of underwing armament, not an airplane kit. It combines a twin store carrier with racks of the BD3-USK type and B13L rocket pods, so that a complete store arises which only has to be attached under the wing of a model of a suitable carrier aircraft. Resin castings capture small elements that injection-molded plastic in this scale mostly cannot manage — the mouths of the pod tubes, the anchor points and details of the supporting structure. The exact composition of the package is not stated here; the manufacturer's part number is AMPC-72005-3.

The real subject

The BD3-USK belongs to the family of Soviet universal store carriers onto which bomb as well as rocket armament is hung. A twin carrier makes it possible to carry two stores on a single wing hardpoint and was a common solution on tactical attack and fighter-bomber machines. The B13L rocket pod is a pod for unguided rockets of 122 mm caliber; it has a smaller number of large-diameter tubes, which makes it markedly different from the densely packed pods of smaller calibers. Unguided rockets of this class served to destroy tougher targets, such as fortifications, shelters and hardened surfaces.

Building and painting tips

Wash the parts in lukewarm soapy water and let them dry. Cut the casting blocks off with a saw and sand the area down — on the pod bodies take care that the circular cross-section is preserved; when sanding resin, protect your airways. It is glued with cyanoacrylate, as plastic cement has no effect on resin. Put the assembly together dry first and check how it sits against the wing of the model. Painting: primer, the base shade of the store, a darker shade into the mouths of the tubes and a fine wash on the outlines. Chipping on the edges and light traces of exhaust gases at the mouths add credibility, but use them sparingly.

Who the set is for

  • builders of models of Soviet and Russian tactical hardware in 1:72 scale
  • modelers who want a more convincing store than the split plastic from a kit
  • anyone interested in a faithful armament configuration on attack aircraft
  • more advanced modelers with experience of resin

The set is supplied unassembled and unpainted. Glue, paints and a base kit are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

According to the name, a twin store carrier with BD3-USK racks and B13L rocket pods. The exact number of parts is not stated here.

It is a pod for unguided rockets of 122 mm caliber. There are therefore fewer tubes and they are markedly larger in diameter than on pods of smaller calibers.

It is not. The set is underwing armament; the aircraft kit has to be obtained separately.

Put it together dry first and check that it seats. It is glued with cyanoacrylate; with a heavier store it pays to strengthen the joint with a wire pin.

Last seen

Advanced ModelingAMPC-72005-31:72

1:72 Twin store carrier w/ BD3-USK racks & B13L

A twin store carrier with BD3-USK racks and B13L rocket pods, 1:72 is a resin set of underwing armament from Advanced Modeling. It is not an aircraft model but a complete store ready to supplement one.
In stock
17.96 €
DragonDR63601:35

1:35 Pz.Kpfw.IV Ausf.F2(G)

A kit of the Panzer IV medium tank in the version with the long 7.5 cm gun, 1:35 scale, with individual link tracks and clear parts.
In stock
59.96 €
Advanced ModelingAMC-72112-41:72

1:72 KAB-1500L bomb w/ universal service cart

The KAB-1500L with a universal service cart, 1:72 is a resin set from Advanced Modeling. This is not an aircraft model but a guided bomb supplemented with ground handling equipment.
In stock
17.96 €
Airone HobbyAHF720281:72

1:72 Northrop A-17 family

A mask set in 1:72 scale for the Northrop A-17 and its variants.
In stock
4.76 €
Aires/QuickboostQB725931:72

1:72 Ki-61-Id Hien drop tanks with pylons

Ki-61-Id Hien drop tanks with pylons are resin auxiliary fuel tanks with pylons in 1:72 from the Quickboost range by the manufacturer Aires. They add stores for long range to a model of the Japanese fighter.
In stock
6.36 €
1:32 AN/ALQ-71(V)-3 ECM pod (1pcs)-25 %Stock ClearanceFavorite
ReskitRS32-05611:32

1:32 AN/ALQ-71(V)-3 ECM pod (1pcs)

The AN/ALQ-71 version 3 pod in 1:32 , one 3D printed piece. A later stage of the American underwing jammer of the Cold War from the brand ResKit.
5 leftof 6
14.36 €10.76 € You save 3.60 €
Aires/QuickboostQB724211:72

1:72 Sukhoi Su-7 gun barrels

Resin Sukhoi Su-7 cannon barrels 1:72 from Aires/Quickboost. A detail replacement for the cannon barrels with hollow bores for truer armament.
In stock
3.56 €
Aires/QuickboostQB723751:72

1:72 P-40B/C gun barrels

Quickboost 1:72 P-40B/C machine gun barrels is a resin set of machine gun barrels for a model of the American Curtiss P-40B/C fighter.
In stock
3.56 €
Aires/QuickboostQB724441:72

1:72 A-4 Skyhawk ejection seat with safety belts

Quickboost 1:72 A-4 Skyhawk - an ejection seat with belts is a resin replacement seat with cast safety belts . It is not an aircraft model : it is an accessory for a cockpit, and a kit is not included in the package.
In stock
4.76 €
MontexMXSM723041:72

1:72 POTEZ 540 (TRANSPORT) AZ-MODEL

A masking set for a model of the French twin-engined aircraft Potez 540 in the transport rendering, scale 1:72, cut for the AZ-model kit.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.