1:24 17inch Yokohama AD08 Tires (245/40 R17) (4 Rubber Tires) is the narrower version of the rubber from Hobby Design. According to the name these are four pieces for models in 1:24 scale.
Responsibility details are not available.
This accessory of the Hobby Design brand replaces the rubber of a model with a foursome of rubber tires. It differs from the wider sister in the same line in the first figure of the size, that is in the width of the tread of the real subject.
A width of 245 millimeters matches the rubber of production sports cars and mid-class coupes. On a model it suits where the fender is not widened and a very wide tire would look crammed under it. On cars with staggered tires it tends to be the narrower one that belongs on the steered axle. The AD08 designation is carried by a line of Japanese tires meant for fast driving in the dry. The difference against the widest sizes is most apparent in the height of the sidewall above the lip of the rim.
Before fitting, check whether the width of the rim matches the tire. Too narrow a rim will leave the side bulging and the wheel then stands crooked. The sidewall of the tire should not be glossy, as a matte surface comes across as more believable than raw rubber. The lettering on the side can be suggested with a fine brush, but less tends to be more. Overly white lettering pulls attention away from the whole car. Reckon also with a narrower tire revealing a greater part of the rim, so it pays to give care to its inner side as well.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
