1:35 Soviet ZSU-57-2 SPAAG Fenders (For TAKOM 2058)

1:35 Soviet ZSU-57-2 SPAAG Fenders (For TAKOM 2058)

18.36 €
Add to Cart

1:35 Soviet ZSU-57-2 SPAAG Fenders (For TAKOM 2058)

Voyager Model photo-etched fenders for the Soviet ZSU-57-2 anti-aircraft system in 1:35 scale. The set is cut for the Takom 2058 kit. This is an accessory, not a standalone model.

Scale1:35
Manufacturer Voyager Model
Product EAN8591111000000

Responsibility details are not available.

18.36 €
15.17 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

ZSU-57-2 — photo-etched fenders 1:35, Voyager Model

The photo-etched set from the Voyager Model brand replaces the fenders of the Soviet ZSU-57-2 anti-aircraft system in 1:35 scale. Plastic fenders are many times thicker than the scale calls for because of the mold; a metal replacement has a thickness close to reality and moreover allows a suggestion of the bending or damage that is common in photographs of machines in service. The set is cut for the Takom 2058 kit; it need not fit other kits of the same vehicle, because they differ in the breakdown of the parts.

The real subject

The ZSU-57-2 is a Soviet self-propelled anti-aircraft system of the 1950s. On a lightened chassis derived from the T-54 medium tank it carries an open rotating turret with a coupled pair of 57 mm automatic guns. The open roof of the turret made it easier to work the guns and to vent the propellant gases, but it did not protect the crew. The vehicle entered the armament of a number of states and lasted in service long after the end of its original role.

Building and painting tips

Separate the photo-etched parts with a scalpel or with photo-etch scissors on a hard surface, and make the bends in a photo-etch bender or between two blades, so that the edge is sharp and straight. It is glued with cyanoacrylate glue, and more experienced modelers solder it. Before painting, degrease the metal and apply a primer intended for metal surfaces, otherwise the paint holds badly. Thin etched fenders will take a suggestion of bending and damage, which lends the model credibility. Cut the original plastic fenders off and level the surface before gluing the metal on. Assemble and paint the running gear before you lose access to it. An open turret means that the inside of it will be visible, so it pays to paint it before the surrounding structure is closed up. Earth-toned washes and pigments applied from the bottom upward suit the weathering.

Who the set is for

  • Modelers building postwar Soviet vehicles in 1:35 scale
  • Owners of the Takom 2058 kit who want to take the detail above the out-of-box level
  • Modelers with experience of photo-etched parts, a bender and cyanoacrylate glue
  • Builders of models for a display case or for a competition

This is an accessory set, not a standalone model. The plastic kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a photo-etched accessory used on an already purchased plastic kit of the ZSU-57-2 in 1:35 scale, specifically on the Takom 2058.

That is not guaranteed. The set is cut for one particular kit and other kits of the same vehicle have a different breakdown of the parts. A separate variant of the set exists for the other kit.

A scalpel or photo-etch scissors, tweezers, a hard surface and ideally a bender. It is glued with cyanoacrylate glue, and more experienced modelers solder it.

Yes. Degrease the parts and apply a primer intended for metal surfaces, otherwise the paint comes off during handling.

Last seen

Voyager ModelPE3510561:35

1:35 Soviet ZSU-57-2 SPAAG Fenders (For TAKOM 2058)

Voyager Model photo-etched fenders for the Soviet ZSU-57-2 anti-aircraft system in 1:35 scale. The set is cut for the Takom 2058 kit. This is an accessory, not a standalone model.
In stock
18.36 €
IBG modelsIBG725701:72

1:72 I.A.R. 81C - Great Air Battles of 1944

Plastic kit of the Romanian I.A.R. 81C fighter in 1:72 scale. The release is tied to the great air battles of 1944; the model is supplied unassembled and unpainted.
In stock
19.96 €
ReskitRSU48-05521:48

1:48 Tornado F3/GR1/GR4 1500L underwing fuel tanks (riveted) (RAF/RSAF) (2 pcs)

Reskit 1:48 underwing fuel tanks, 1500 l (riveted), for the Tornado F3/GR1/GR4 is a 3D-printed resin accessory with two large-capacity tanks in Royal Air Force and Royal Saudi Air Force form.
In stock
14.76 €
ReskitRSF48-00811:48

1:48 CH-53E Super Stallion, MH-53E Sea dragon pilots (in a standing position - type 2) (2 pcs)

1:48 CH-53E Super Stallion, MH-53E Sea Dragon - standing pilots (type 2) is a set of two 3D-printed resin figures of heavy helicopter pilots in 1:48 scale.
In stock
15.96 €
Quinta StudioQD351071:35

1:35 Mercedes-Benz L3000 3D-Printed & coloured Interior on decal paper (ICM)

Quinta Studio 1:35 Mercedes-Benz L3000, a color 3D interior decal , is a set of raised, pre-printed interior detail on backing decal paper for models of the German L3000 truck. Target kit: ICM.
In stock
5.16 €
1:32 AH-1G Cobra main rotor with dust and debris deflector (sand shields) late version for ICM kit-25 %Stock ClearanceFavorite
ReskitRSU32-01761:32

1:32 AH-1G Cobra main rotor with dust and debris deflector (sand shields) late version for ICM kit

The main rotor of the Bell AH-1G Cobra attack helicopter with a dust and debris deflector in 1:32 scale, in the late form according to the name of the item.
Last one!of 6
21.56 €16.16 € You save 5.40 €
1:32 Driver & airmen (modern) (3 pcs) (MHU-83 D/E lift truck LOWER loading position for RSK32-0010)-25 %Stock ClearanceFavorite
ReskitRSF32-00791:32

1:32 Driver & airmen (modern) (3 pcs) (MHU-83 D/E lift truck LOWER loading position for RSK32-0010)

Three figures of modern air force ground personnel in 1:32, posed to the MHU-83 D/E munitions lift truck with the lifting platform in the lower position.
4 leftof 6
32.36 €24.28 € You save 8.08 €
ReskitRSU48-01781:48

1:48 F-100 Super Sabre late exhaust nozzle for Trumpeter kit

Late F-100 Super Sabre exhaust nozzle 1:48 is a resin accessory from Reskit that replaces the plastic nozzle with a more accurate and more detailed part. Intended for the Trumpeter kit.
In stock
16.36 €
XtradecalX721461:72

1:72 Handley-Page Halifax B.II Series 1A/B.II Series 1A Special

The decals 1:72 Handley-Page Halifax B.II Series 1A/B.II Series 1A Special are intended for models of the British four-engined bomber.
In stock
10.36 €
FlyhawkFH7000351:700

1:700 WWII IJN Cruiser Takao 1942 and 1944 (for Aoshima)

The Flyhawk 1:700 photo-etched set for the cruiser Takao is a detail set of photo-etched parts for a model of the Japanese heavy cruiser in her 1942 and 1944 versions in 1:700 scale. Intended for Aoshima kits.
In stock
48.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.