29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.
1:48 F/A-18A++ 3D-Printed & coloured Interior on decal paper (HobbyBoss)(Small version)

1:48 F/A-18A++ 3D-Printed & coloured Interior on decal paper (HobbyBoss)(Small version)

7.76 €
Add to Cart

1:48 F/A-18A++ 3D-Printed & coloured Interior on decal paper (HobbyBoss)(Small version)

Quinta Studio 1:48 F/A-18A++ is a set of pre-colored 3D interior decals on decal paper, cut for the Hobby Boss kit. It is the smaller version of the set and an add-on to a model, not a kit.

Scale1:48
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

10.36 € 7.76 €
6.41 € without VAT
−25 % You save 2.60 €
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quinta Studio 1:48 F/A-18A++, 3D interior decals, smaller version

Layered printing directly onto decal paper gives the interior details a raised relief and finished colors. The set is applied to the model like a decal, but the result looks like a laboriously assembled and painted detail set. This set is the smaller version; the full version of the same set exists as a separate item. The set is cut for the F/A-18A++ kit from Hobby Boss in 1:48 scale: Quinta makes the same version of the aircraft for kits from other manufacturers too, so the target kit decides what to order. The model is not included in the package.

The real subject

The designation F/A-18A++ carries the upgraded form of the single-seat A version of the carrier-based Hornet. The upgrades concerned mainly the avionics and the cockpit equipment, so the interior differs from the original machines; that is why Quinta has a separate set for this form and it is not used universally on every A version. The Hornet itself is a twin-engine aircraft intended for fighter and attack tasks alike, with a pair of canted vertical tails.

Application and tips

First paint the interior and let it dry thoroughly. With 3D decals as well, the film belongs on a smooth gloss surface: on a flat and rough area, air stays under the decal and the edges will silver. Cut the elements out one at a time, soak them for about fifteen seconds in lukewarm water and carry them with a brush or soft tweezers. Do not use a decal softener or setter: their chemistry will attack the printed resin and spoil the element. The basics are lukewarm water and pressing down with a cotton bud; the element has no adhesive layer of its own and holds on the gloss varnish. Once dry, go over the interior with flat varnish so that the gloss interlayer disappears.

Who the set is for

  • Builders of modern carrier aircraft in 1:48 scale
  • Modelers who want a pre-colored cockpit without painting tiny features
  • Owners of the Hornet kit from Hobby Boss
  • Those interested in a narrower variant than the full version of the set

An add-on to a model. The kit, paints and clear coat are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The name ties it to the A++ form, whose cockpit differs from the original machines. For another version look for the corresponding set; Quinta makes them as separate items.

You recognize the smaller version from the name; the full version is sold separately. Compare the scope of both on the boxes.

No, they are printed in color. At most you can fine-tune the emphasis on the edges and the degree of sheen with a final clear coat.

Do not put one on at all. The manufacturer prohibits it on this line, as its chemistry will attack the printed resin and spoil the element.

Last seen

1:48 F/A-18A++ 3D-Printed & coloured Interior on decal paper (HobbyBoss)(Small version)-25 %Stock ClearanceFavorite
Quinta StudioQDS482781:48

1:48 F/A-18A++ 3D-Printed & coloured Interior on decal paper (HobbyBoss)(Small version)

Quinta Studio 1:48 F/A-18A++ is a set of pre-colored 3D interior decals on decal paper, cut for the Hobby Boss kit. It is the smaller version of the set and an add-on to a model, not a kit.
4 leftof 5
10.36 €7.76 € You save 2.60 €
1:48 Panavia Tornado ASSTA 3.1 TFace-25 %Stock ClearanceFavorite
EduardEX7421:48

1:48 Panavia Tornado ASSTA 3.1 TFace

The self-adhesive masking set Eduard Panavia Tornado ASSTA 3.1 TFace in 1:48 scale, cut from kabuki tape. An accessory for a kit, not a model.
10 left
11.80 €8.84 € You save 2.96 €
MH modelsMHX480561:48

1:48 Lockheed P-38G/H Lightning markings airbrush mask for Tamiya

An MH models 1:48 set of airbrush masks for spraying the national insignia and markings of the Lockheed P-38G/H Lightning from the Tamiya kit. It is neither a kit nor decals but self-adhesive templates through which the markings are sprayed in paint.
In stock
5.16 €
Artwox ModelAW200881:700

1:700 DKM Bismarck(For Revell 05098)

A wooden deck in 1:700 scale for a model of the German battleship Bismarck, built on the Revell kit with the catalog number 05098. It replaces the plastic surface of the deck with the natural pattern of wood.
In stock
21.96 €
AFV ClubAFV35S881:35

1:35 CM-33 TIFV (PRE-SERIAL PRODUCTION)

CM-33 TIFV (pre-production version) 1:35 — a plastic kit of the Taiwanese 8x8 armored personnel carrier Clouded Leopard from AFV Club.
In stock
65.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.