A wooden deck with masks for the model of the large cruiser USS Guam CB-2 in 1:700 scale, intended for the Trumpeter 06739 kit.
Responsibility details are not available.
USS Guam CB-2 was an American large cruiser of the Alaska class, taken into service toward the end of the Second World War. The hull of these ships was substantially longer than that of ordinary heavy cruisers, and the forward deck ahead of the turrets of the main armament forms a long continuous area. On the model the deck is therefore one of the first things to catch the eye.
The set is intended for the Trumpeter 06739 kit and combines two things that complement each other during the build.
First try everything dry and check the fit with the openings for the superstructures. Stick the masks on before spraying, onto a clean and degreased base, press the edges down carefully and apply the paint in several thin coats. Lift the mask shortly after spraying, while the paint is not yet fully cured. Lay the wooden deck down only on a finished, sprayed hull, so that no overspray reaches the wood; the grain of the wood is brought out by a dark glaze coat in a small amount. The gluing procedure is given in the manufacturer's instructions.
The set suits modelers who are building the kit mentioned and want a deck with the grain of real wood as well as sharp shade boundaries without cutting tape. It is an accessory for a kit, not a complete model; paints and glue are not included, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!