A set of photo-etched parts for detailing a model of the American ship USS Independence LCS-2 in 1:700 scale, tied to the Dragon Smart Kit.
Responsibility details are not available.
USS Independence, with the hull designation LCS-2, is an American littoral combat ship. It differs from the usual surface ships in its silhouette already: it has a trimaran layout with two side hulls, an angular superstructure and a sprawling flight deck at the stern. It arose for fast operation in shallow coastal waters and for the use of equipment that can be changed as needed.
Photo-etched parts for a model in 1:700 scale for the Dragon Smart Kit. It is precisely on ships that photo-etched parts pay off most: features that in plastic would come out disproportionately thick have the right thickness in thin metal sheet and stand being looked at from close up. The extent of the parts and their placing on the model is given in the instructions from the manufacturer.
In 1:700 scale this is very small work. Get sharp tweezers, a new knife and good light ready, separate the parts on a firm surface and sand the remains of the tabs. Bond with super glue applied with a pin, never straight from the bottle. Before painting, degrease the metal and go over it with primer, otherwise the paint does not hold on the smooth surface.
The set is for patient builders of ship models who have worked with photo-etched parts before. Unless stated otherwise, the kit, paints and glue are not part of the delivery.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!