Airbrush CAMO-MASK for 1/35 M1025 Camouflage Scheme

Airbrush CAMO-MASK M1025 - J's Work masking stencils, 1:35 scale

A set of pre-cut self-adhesive masking stencils from J's Work for 1:35 scale, intended for spraying the camouflage pattern on a model of the American M1025 multipurpose vehicle (the HMMWV or Humvee variant). This is not a model or a kit: it is an airbrush aid. The stencils are stuck onto a model that already has its base coat, the next camouflage color is sprayed over them, and once they are taken off a sharply defined masking pattern remains. That does away with laborious hand masking or with drawing the pattern by eye. Paints, the model and an airbrush are not included in the package.

What the masks are for

• They reproduce one particular camouflage scheme of the M1025 vehicle with sharp, repeatable transitions.
• They save time compared with masking with tape or modeling putty and take the uncertainty out of freehand spraying.
• They let even a less experienced modeler achieve a clean multicolor pattern.

Usage tips

• Spray the whole model first in the base (lightest) color of the scheme and let it dry thoroughly.
• Stick the stencils on a fully cured finish and press the edges down so that the paint does not run under the mask.
• Airbrush at a right angle and in thin coats, which lowers the risk of bleeding and keeps the edges sharp.
• Take the mask off soon after the paint has dried, carefully and at a sharp angle, so that you do not lift the layer underneath.

Who the set is for

• For builders of the M1025 or HMMWV in 1:35 scale.
• For modelers who want accurate camouflage without hand masking.
• For anyone improving their work with an airbrush and masks.

This is a masking aid, not a model. The model, paints and an airbrush are not included in the package.