1:48 SBD-1/SBD-2 Dauntless Pilot's cockpit 3D-Printed & coloured Interior on decal paper (Accurate Miniatures/Academy/etc)

1:48 SBD-1/SBD-2 Dauntless Pilot's cockpit 3D-Printed & coloured Interior on decal paper (Accurate Miniatures/Academy/etc)

16.36 €
Add to Cart

1:48 SBD-1/SBD-2 Dauntless Pilot's cockpit 3D-Printed & coloured Interior on decal paper (Accurate Miniatures/Academy/etc)

The pilot's cockpit of the early SBD-1 and SBD-2 Dauntless versions in 1:48 scale, printed in color and in relief. Intended for the Accurate Miniatures tooling and its later boxings.

Scale1:48
Manufacturer Quinta Studio
Product EAN9991117369116

Responsibility details are not available.

16.36 €
13.52 € without VAT
4 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The instrument panel of the early Dauntlesses

The first production Dauntlesses were taken over by the Marine Corps in 1940, and the second production version with larger tanks went to the Navy. Both share what sets them apart from later machines: the arrangement of the instruments, a different layout of the controls and a different gunsight. It is this early form that the set captures, while the later versions have their own items from the brand.

An instrument panel in 1:48 scale is a test of patience. A dial face measures a fraction of a millimeter on the finished model, and the modeler has three routes to choose from: paint it, use photo-etched metal with film behind it, or glue on a printed section. Printing wins on legibility. The needles, the scales and the colored sectors are printed at a resolution a brush cannot reach, and the bezel of each instrument has a height of its own, so that the glass beneath it optically recedes.

The panel comes with the side consoles, the seat with its belts and the surfaces around them. They are applied in the usual way: cut them out around each motif, dip them in lukewarm water, transfer them, settle them and let them dry. Skip the decal softener, as the printed resin cannot take it. The surface underneath has to be smooth, dry and free of grease.

On a finished model a combination of both looks good: the printed panel under an open canopy, with the surrounding surfaces sprayed so that the shades run into one another. It can all be pulled together with a light matte clear coat over the whole compartment, which evens out the sheen of the paper carrier against the painted plastic around it. The rear station of the same aircraft is covered by a separate item, and the plastic kit is bought separately.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is based on the first two production versions, which had a different instrument arrangement. The brand has other items for the later machines.

Yes, the scales and colored sectors are printed at a finer resolution and the bezels have a height of their own.

Only if you want the whole interior. The two parts are sold separately.

Last seen

Quinta StudioQD487031:48

1:48 SBD-1/SBD-2 Dauntless Pilot's cockpit 3D-Printed & coloured Interior on decal paper (Accurate Miniatures/Academy/etc)

The pilot's cockpit of the early SBD-1 and SBD-2 Dauntless versions in 1:48 scale, printed in color and in relief. Intended for the Accurate Miniatures tooling and its later boxings.
In stock
16.36 €
ŘOP o.s.MNFDL480081:48

1:48 Polikarpov I-16 Rata - Stalin's Falcons on I-16

A decal sheet for models of the Soviet Polikarpov I-16 fighter in 1:48 scale. The set carries the markings of machines whose pilots used to be called Stalin's Falcons.
In stock
7.96 €
Quinta StudioQD485391:48

1:48 US WWII Cockpit instrument gauges 3D-Printed & coloured Interior on decal paper (All Kits)

Three-dimensional color instruments of American aircraft of the Second World War in 1:48 scale on decal paper. A universal set usable on any kit.
In stock
12.76 €
ReskitRSU72-02961:72

1:72 F-4 (E, J, F, G, S) Phantom II exhaust nozzles for Revell kit

F-4 Phantom II exhaust nozzles (E, J, F, G, S) 1:72 are a 3D-printed resin detail set from Reskit for the late versions of the fighter-bomber.
In stock
13.96 €
Furball Aero-DesignFBDS72051:72

1:72 Colors and Markings of US Navy F6F Hellcats Part 2

Furball Aero-Design 1:72 US Navy F6F Hellcats: colors and markings, part 2 is a set of water-slide decals with the schemes of F6F-5 carrier fighters.
In stock
19.96 €
MASTERGM350421:35

1:35 German WWII folding 2m rod antenna (for early PzKpfw II-IV) (1pc)

A turned folding 2 m rod antenna in 1:35 scale is a one-piece metal accessory for the early versions of the German Pz.Kpfw. II to IV tanks, not a kit.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.