This landing gear wheel set for the Su-30 in 1:72 brings, according to the manufacturer, weighted nose and braked wheels and a nose gear mudguard of the correct shape. An accessory for a kit.
Responsibility details are not available.
Replacement landing gear wheels in 1:72 scale from the Russian manufacturer Temp Models, printed from photopolymer. For this set the manufacturer gives finely detailed nose and braked wheels in the weighted state and a nose gear mudguard of the correct shape. It replaces the plastic wheels from the kit, but it does not make up an aircraft model.
The Su-30 is a two-seat multirole combat aircraft derived from the heavy Su-27 fighter. It is powered by two turbofan engines with afterburners and, thanks to its large load of fuel and armament, ranks among the heaviest aircraft of its category. The high takeoff weight shows on the landing gear as well: on a standing aircraft the tires are clearly weighted and the nose leg carries a prominent mudguard.
Cut the print supports away with a scalpel and sand the pad they leave, ideally on the side that sits on the ground. Glue the wheels with cyanoacrylate glue, that is with super glue. Lay down a filler primer before painting. Do not paint the tires pure black; a very dark gray with a lighter dust pigment on the sidewalls and in the tread is better. Sanding is best done wet and with respiratory protection.
The set is supplied unassembled and unpainted. Glue, paints and the base model are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
