Military Vehicle Add-ons

9 382 products
Product filtering
up to €
GAS HANSGH-T720101:72

1:72 Pz. I Ausf. F Late & Pz. II Ausf. J Tracks

A set of 1:72 tracks for the late Pz. I Ausf. F and for the Pz. II Ausf. J is a separate running gear accessory for a pair of German heavily armored light tanks. A vehicle model is not included.
In stock
13.16 €
GAS HANSGH-T720091:72

1:72 Pz. I Ausf. F Early Tracks

1:72 Pz. I Ausf. F Early Tracks is a separate set of tracks in 1:72 scale for the German heavily armored light tank Pz. I Ausf. F in its early form. It is not a vehicle kit but an accessory for the running gear.
In stock
13.16 €
GAS HANSGH-NB13011

Flat Rivet 1.6 mm

Flat Rivet 1.6 mm are modeling rivets with a flat head of 1.6 mm from the GAS HANS brand. It is the largest size offered in this sub-range.
In stock
3.96 €
GAS HANSGH-NB13010

Flat Rivet 1.4 mm

Flat Rivet 1.4 mm are modeling rivets with a flat head of 1.4 mm from the GAS HANS brand. They are among the larger sizes in this sub-range.
In stock
3.96 €
GAS HANSGH-NB13009

Flat Rivet 1.2 mm

Flat Rivet 1.2 mm are modeling rivets with a flat head of 1.2 mm from the GAS HANS brand, intended for adding riveted joints to equipment models.
In stock
3.96 €
GAS HANSGH-NB13008

Flat Rivet 1.0 mm

Flat Rivet 1.0 mm are modeling rivets with a flat head of 1.0 mm from the GAS HANS brand. It is a thoroughly usable middle of the range of sizes offered.
In stock
3.96 €
GAS HANSGH-NB13007

Flat Rivet 0.9 mm

Flat Rivet 0.9 mm are modeling rivets with a flat head of 0.9 mm from the GAS HANS brand. They are among the finer sizes in this sub-range.
In stock
3.16 €
GAS HANSGH-NB13006

Flat Rivet 0.8 mm

GAS HANS flat rivets 0.8 mm are fine individual rivets for adding detail to the surface of models.
In stock
3.16 €
GAS HANSGH-NB13005

Flat Rivet 0.7 mm

Flat rivets 0.7 mm from GAS HANS: a set of fine 3D-printed flat rivets for superdetailing models. The 0.7 mm figure is the size of the part, not a scale.
In stock
3.16 €
GAS HANSGH-NB13004

Flat Rivet 0.6 mm

Flat rivets 0.6 mm from GAS HANS: a set of fine 3D-printed flat rivets for superdetailing models. The 0.6 mm figure is the size of the part, not a scale.
In stock
3.16 €
GAS HANSGH-NB13003

Flat Rivet 0.5 mm

GAS HANS flat rivet 0.5 mm is a set of miniature rivets with a flat head for faithful surface detail on models; it is an accessory, not a kit.
In stock
3.16 €
GAS HANSGH-NB13002

Flat Rivet 0.4 mm

GAS HANS Flat Rivet 0.4 mm is a set of very fine resin (3D-printed) flat rivets of 0.4 mm diameter for fine detailing of models.
In stock
3.16 €
GAS HANSGH-NB13001

Flat Rivet 0.3 mm

GAS HANS Flat Rivet 0.3 mm is a set of exceptionally fine resin (3D-printed) flat rivets 0.3 mm across for the finest detailing.
In stock
3.16 €
GAS HANSGH-NB12011

Flat Spherical Rivet 1.6 mm

Flat Spherical Rivet 1.6 mm are modeling rivets with a flattened round head of 1.6 mm from the GAS HANS brand. They are among the largest sizes in this sub-range.
In stock
3.96 €
GAS HANSGH-NB12010

Flat Spherical Rivet 1.4 mm

GAS HANS flat spherical rivets 1.4 mm are miniature rivets with a low spherical head for detailing models. It is not a kit but accessory material for replacing riveting that is missing or has been rubbed away.
In stock
3.96 €
GAS HANSGH-NB12009

Flat Spherical Rivet 1.2 mm

Flat Spherical Rivet 1.2 mm are modeling rivets with a flattened round head of 1.2 mm from the GAS HANS brand. They have a lower profile than full round-head rivets.
In stock
3.96 €
GAS HANSGH-NB12008

Flat Spherical Rivet 1.0 mm

GAS HANS Flat Spherical Rivet 1.0 mm is a set of fine resin (3D-printed) rivets with a flattened hemispherical head 1.0 mm in diameter for detailing models.
In stock
3.96 €
GAS HANSGH-NB12007

Flat Spherical Rivet 0.9 mm

GAS HANS Flat Spherical Rivet 0.9 mm is a set of fine 3D-printed resin rivets with a flattened dome head 0.9 mm in diameter for detailing models.
In stock
3.16 €
GAS HANSGH-NB12006

Flat Spherical Rivet 0.8 mm

GAS HANS Flat Spherical Rivet 0.8 mm is a set of fine 3D-printed resin rivets with a flattened dome head 0.8 mm in diameter for detailing models.
In stock
3.16 €
GAS HANSGH-NB12005

Flat Spherical Rivet 0.7 mm

GAS HANS Flat Spherical Rivet 0.7 mm is a set of fine 3D-printed resin rivets with a flattened dome head 0.7 mm in diameter for detailing models.
In stock
3.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.