An add-on set of flaps in the takeoff position for the model of the Airbus A330 in 1:144 scale. According to the name, it is intended for the Zvezda kit.
Responsibility details are not available.
The takeoff position of the flaps is a compromise. On the run and at liftoff the aircraft needs as much lift as possible, but at the same time it does not want the wing to brake it, which is why the flaps are only partly extended, far less than on landing. The difference is clear at a glance: the trailing edge is deflected downward only slightly, the slot between the flap and the wing is narrower and the whole wing keeps a slender profile. A machine in the climb, with the flaps in this position and the landing gear just closing, is one of the most rewarding sights an airliner offers.
The set holds parts for showing the flaps in the takeoff position on a model of the Airbus A330 in 1:144 scale, and according to the name it counts on the Zvezda kit. The extent of the parts and the procedure for fitting them are given in the instructions from the manufacturer.
The parts are not polystyrene, so ordinary cement for plastic will not join them; cyanoacrylate glue holds reliably. Cut the excess material off with a sharp blade a little away from the part and carefully sand the rest back, so that the trailing edge stays thin. Seat the flaps of both halves of the wing at the same angle, otherwise the model looks twisted; preparing a simple jig and gluing both sides against each other proves itself. Wash and degrease the parts before painting.
For modelers of airliners who want to build the machine in the climb after takeoff rather than in the smooth cruise configuration. Paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!