Styrene strip 0.50 x 2.00 x 350 mm from AK interactive is a package of ten polystyrene strips for frames, edging and building your own parts of a model.
Responsibility details are not available.
A package of ten pieces of plastic strip with a rectangular cross section of 0.50 x 2.00 mm, each 350 mm long. The material is polystyrene - a plastic that cuts with a knife, glues with ordinary cement for models, sands, fills and paints. It is not a kit but a blank for your own work on a model or a diorama.
A two-to-one ratio of the sides makes this size a classic fine strip. It is narrow enough not to look heavy-handed on a model, and at the same time stiff enough to hold a straight line while gluing and not to buckle.
For a clean edge run the knife against a metal rule in two or three light passes and break the rest. When you need more pieces of the same length, it pays to glue a stop made from an offcut to the surface and measure from it - the parts then fit exactly and the frame does not come out skewed. It is glued with thin cement for polystyrene, which runs under a strip laid in place by capillary action. Once dry the joint can be sanded and filled, so the gap disappears. It can be painted in exactly the same way as a plastic kit.
It is material for building, not a finished model. Glue, paints and tools are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!