Colored cab equipment for the modern Ukrainian KrAZ-6322 truck in 1:35 scale, in a reduced extent. The carrier is decal paper and the outlines match the parts of the firm Hobby Boss.
Responsibility details are not available.
The 6322 type came about in Kremenchuk in the mid-1990s as the successor to the older military line, and it already carries a Ukrainian badge. It stayed with the three-axle layout and all-wheel drive, but it received a turbocharged V8 of around three hundred thirty horsepower, stronger axles and modernized wiring. Vehicles of this type carried troops and materiel, towed trailers with equipment and, in the export form, appeared in the Middle East as well. In recent years it has been seen in the Ukrainian army as a chassis for bodies of all kinds of purpose, from tankers to workshop containers.
On large truck models the cab tends to be high up, so anyone who looks a model over closely is bound to look into it. Bare plastic reads as empty there, while painting tiny dials by hand costs a great deal of time and temper. The accessory here gets around the problem: both the colors and the raised profile are printed in advance, the element is soaked, slid off the carrier and laid in place, where it holds by itself once dry.
The extent is kept reduced, that is to the surfaces that stay in view. The cut is taken from the parts of the firm Hobby Boss in 1:35. It turns out best when the plastic is evened out in advance with a dark coat and degreased, the element is seated without a softener, which would damage the printed resin, and once dry the whole is gone over with a matte coat. A few small things then finish the impression: dust on the floor, bootprints and a scuffed edge on the sill.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!