Kladka dvojitá + hák 9,6mm 3d print - 10 ks

The largest double block with a hook in the manufacturer's range, with a stated length of 9.6 mm. Ten 3D-printed pieces for large ship models.

Manufacturer Artillery models
Product EAN8591111009874

Responsibility details are not available.

1.96 €
1.62 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The heaviest piece in the hooked line

9.6 millimeters is the largest dimension in which the manufacturer carries a double block with a hook. On a real ship this was a piece worked with both hands, hung from a strong eye in the deck or under the top. Such blocks served in loading cargo, in hoisting heavy boats and in tensioning the standing rigging after a longer voyage.

The dimension corresponds to a block roughly half a meter long in 1:48, or over thirty centimeters in 1:35. Both are sizes documented on surviving ships and in period equipment inventories. Ten pieces in one package.

Where it finds its use on a model

Besides sailing ships it also suits fishing boats, tugs or older cargo steamers, where a cargo boom with a tackle stayed in service far into the twentieth century. The shape of a wooden block meanwhile hardly changed over the centuries, so the part is not tied to a single period.

  • On steamers the blocks were usually of steel; it is enough to spray them a metallic shade.
  • A suitable line at this size has a diameter of around 0.4 mm.
  • Add a short hanging end of line to a hung block; it brings the whole scene to life.
  • When building a diorama, leave one piece lying loose on the deck.

The package contains blocks exclusively, without any further material. Given the size of the part it pays to check that a strong enough line leads to it on the model, because an undersized thread looks distracting with such a massive block. Choose the thickness of the thread by eye rather than from a table.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Yes. A cargo boom with a tackle was used on cargo steamers and fishing boats far into the twentieth century.

Roughly a half-meter one in 1:48, or a thirty-centimeter one in 1:35. It is an approximate conversion.

Yes; on ships from the end of the nineteenth century and later a steel version is historically correct.

A thread around 0.4 mm in diameter. A thinner thread would look out of place with such a massive block.

Last seen

Artillery modelsARTB6004

Kladka dvojitá + hák 9,6mm 3d print - 10 ks

The largest double block with a hook in the manufacturer's range, with a stated length of 9.6 mm. Ten 3D-printed pieces for large ship models.
In stock
1.96 €
Artillery modelsARTB6003

Kladka dvojitá + hák 7mm 3d print - 10 ks

A double block with a hook 7 mm long, ten pieces in one package. 3D printed for the rigging of ship models.
In stock
1.96 €
Artillery modelsARTB8004

Kladka zdvojená x 8mm 3d print - 10 ks

Ten double blocks 8 mm in size, made by 3D printing. An accessory for the rigging of sailing ship and ship models.
In stock
1.96 €
Artillery modelsARTB3002

Kladka trojitá 2mm 3d print - 10 ks

Triple blocks 2 mm in size, printed by 3D technology, ten pieces in the package. An accessory for the rigging of historical ships.
In stock
1.96 €
Artillery modelsARTB8002

Kladka zdvojená x 4mm 3d print - 10 ks

Ten double blocks 4 mm in size, made by 3D printing, for the rigging of sailing ship models.
In stock
1.96 €
Artillery modelsARTB5004

Kladka jednoduchá + hák 8mm 3d print - 10 ks

An eight-millimeter single block with a hook, ten pieces in the package. A printed accessory for ship models in large scales.
In stock
1.96 €
Artillery modelsARTB3001

Kladka trojitá 1mm 3d print - 10 ks

Ten triple blocks 1 mm in size from 3D printing. The finest member of the line, intended for the running rigging of sailing ships in small scales.
In stock
1.96 €
Artillery modelsARTB2001

Kladka dvojitá 1mm 3d print - 10 ks

A bag with ten printed blocks with two sheaves, one millimeter in dimension. The finest step in this line.
In stock
1.96 €
Artillery modelsARTB3004

Kladka trojitá 4mm 3d print - 10 ks

Triple blocks 4 mm in size, the largest in this line. Ten 3D-printed pieces for the rigging of large sailing ships.
In stock
1.96 €
Artillery modelsARTB3003

Kladka trojitá 3mm 3d print - 10 ks

A set of ten triple blocks 3 mm in dimension. 3D printed for building the rigging of sailing ships in larger scales.
In stock
1.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.