Sanding

630 products
Product filtering
up to €
MineshimaMNS-I35

Craft File Flat Medium I35

The Mineshima I35 flat modeling file has a medium cut. It serves to level surfaces quickly, to sand joints down and to remove the remains of gates.
In stock
1.96 €
MineshimaMNS-I28

Craft File Triangle I28

Mineshima I-28 is a modeling file of triangular section, 140 mm long, with a fine cut, for cleaning up sprue gates.
In stock
1.96 €
MineshimaMNS-I27

Craft File Square I27

The Mineshima square modeling file is intended for working right-angled grooves, corners and square recesses on plastic and resin parts.
In stock
1.96 €
MineshimaMNS-I26

Craft File Round I26

The Mineshima round modeling file is intended for working openings, curved grooves and concave surfaces on plastic and resin parts.
In stock
1.96 €
MineshimaMNS-I25

Craft File Flat I25

The Mineshima flat modeling file serves to level flat surfaces, edges and parting lines on plastic and resin parts accurately.
In stock
1.96 €
MineshimaMNS-I205M

Sand paper Holder Round I205M

The Mineshima round sanding paper holder turns ordinary abrasive paper into a rigid sanding stick and makes sanding curved and shaped surfaces of a model easier.
In stock
15.16 €
MineshimaMNS-I10

Medium File Half Round I10

Mineshima Medium File Half Round I10 is a modeling file with a half-round section. The flat side serves for flat surfaces, the convex one for concave curves and inner radii.
In stock
13.96 €
MineshimaMNS-H2

Plastic Model File Half Round H2

Mineshima Plastic Model File Half Round H2 is a half-round modeling file for working curved surfaces and openings on plastic parts.
In stock
3.16 €
MineshimaMNS-H16

Craft File Set 5pcs Medium H16

Mineshima Craft File Set 5pcs Medium H16 is a set of five modeling files of medium grit with different profiles for faster material removal.
In stock
7.16 €
MineshimaMNS-H14

Craft File Set 5pcs H14

Mineshima Craft File Set 5pcs H14 is a set of five modeling files with a fine grade and various profiles for cleaning up sprue nubs and details.
In stock
7.16 €
MineshimaMNS-H1

Plastic Model File H1

Mineshima Plastic Model File H1 is a flat modeling file intended for cleaning up and shaping the plastic parts of kits.
In stock
2.76 €
MineshimaMNS-GY4

Needle File Medium GY4

Mineshima Needle File Medium GY4 is a very thin needle file of medium grit for cleaning up narrow seams and hard-to-reach places on plastic models.
In stock
21.16 €
ExcelEX55685

5x80 Grit Belts . PASKI DO SZLIFOWANIA

Abrasive belts in 80 grit. A coarse abrasive for quickly leveling larger excesses, followed by a finer grit.
In stock
8.36 €
ExcelEX55682

320 Grit Sanding Belts (5 pieces)

Abrasive belts, 320 grit (5 pieces) from Excel are replaceable belts for a sanding stick for the finer phase of work. 320 grit prepares a surface for primer and will also manage sanding between coats of finish.
In stock
9.56 €
ExcelEX55681

240 Grit Sanding Belts (5 pieces)

Abrasive belts, 240 grit (5 pieces) from Excel are replaceable consumable belts for a sanding stick. 240 grit is the medium step that levels parting lines and glued seams on a fuselage.
In stock
10.36 €
ExcelEX55667

6 Assorted File Set, Cut 2

A set of 6 files, Cut 2 from Excel is basic workshop equipment for a modeler. Six profiles cover the usual situations in a build without the half of a larger set you would never reach for.
In stock
12.36 €
ExcelEX55607

12 Assorted Files, Cut 2

A set of 12 files, Cut 2 from Excel covers a wide range of profiles in one package. For every shape of surface on a model you then have a file that fits it.
In stock
20.76 €
ExcelEX55604

Knife File, Cut 2

A knife file, Cut 2 from Excel has a wedge-shaped section ending in a sharp edge. It reaches into valleys and into sharp inner angles that neither a flat nor a three square file can get to.
In stock
3.16 €
ExcelEX55602

Three Square File, Cut 2

A three square file, Cut 2 from Excel has three working faces and sharp edges. It reaches into inner corners and quickly cleans up the remains left after nipping a part off the sprue.
In stock
3.16 €
ExcelEX55600

Square File, Cut 2

A square file, Cut 2 from Excel has a right-angled section with four working faces. It suits enlarging square openings and leveling right-angled grooves.
In stock
3.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.