Tamiya

151 products
Product filtering
up to €
Hex Wrench Screwdriver Bit-25 %Stock ClearanceFavorite
TamiyaTA74165

Hex Wrench Screwdriver Bit

Hex Wrench Screwdriver Bit is a hex bit for a screwdriver handle, a tool for the modeling workshop.
Last one!
7.96 €5.96 € You save 2 €
Switch Lubricant-25 %Stock ClearanceFavorite
TamiyaTA87023

Switch Lubricant

Switch Lubricant is a grease from the Tamiya tool range intended for the contact surfaces of mechanical speed controls and switches. It keeps its viscosity even when the contact heats up.
3 leftof 9
2.76 €2.08 € You save 0.68 €
TamiyaTA87022

Molibdenium grease

Molybdenum grease for the moving parts of models, for gears and for pivots.
In stock
3.16 €
TamiyaTA69903

Modeler's Punch Bit 3.5mm

Tamiya Modeler's Punch Bit 3.5 mm is a replacement punch bit in chrome-molybdenum steel for punching out accurate circular discs 3.5 mm in diameter.
In stock
8.76 €
TamiyaTA69902

Modeler's Punch Bit 2.5mm

Tamiya Modeler's Punch Bit 2.5 mm is a replacement punch bit in chrome-molybdenum steel for punching out accurate circular discs 2.5 mm in diameter.
In stock
8.76 €
TamiyaTA87227

Anti-Slip Sticker (75 x 150 mm)

The Tamiya Anti-Slip Sticker is a self-adhesive non-slip sheet measuring 75 x 150 mm. You cut pieces from it exactly as needed and stick them wherever something has to hold firm and not slide.
In stock
2.36 €
TamiyaTA74007

Screwdriver No.1 M

Tamiya Screwdriver No.1 M is a medium-sized modeling screwdriver from the tool range of the Japanese brand Tamiya. It serves for driving the small screwed joints on models and accessories.
In stock
3.96 €
TamiyaTA74122

Modeler's Punch 2mm/3mm

The Tamiya Modeler's Punch 2mm and 3mm is a hand punch for cutting precise round openings out of plastic, film and masks.
In stock
22.36 €
TamiyaTA87211

CA-CEMENT AND PRIMER SET - PP / PE / POM - 3G

The Tamiya CA cement and primer set (for PP/PE/POM) is a modeling supply - super glue with a primer for plastics that ordinary cement does not hold on.
In stock
7.96 €
TamiyaTA74164

Diamantový pilník

A tapered diamond file from Tamiya: a fine file with a diamond surface for widening and truing holes and for cleaning up the parts of a model.
In stock
21.16 €
TamiyaTA74162

Fine Engraving Blade 0.25mm

Tamiya Fine Engraving Blade 0.25 mm is a fine engraving blade, a modeling tool for restoring and scribing panel lines on plastic models.
In stock
23.96 €
TamiyaTA87139

CA Cement (Strong)

Tamiya CA Cement (Strong) is a strong super glue (cyanoacrylate) for firm, fast joints on plastic, metal, resin and rubber.
In stock
4.76 €
TamiyaTA87190

Polycarbonate Reinforcing Cement

Tamiya Polycarbonate Reinforcing Cement , a flexible adhesive for reinforcing and repairing polycarbonate (Lexan) bodies of RC models.
In stock
11.96 €
TamiyaTA74161

Modeler's Knife PRO Replacement Blade (Scraper, 2pcs.)

Tamiya replacement blades for the Modeler's Knife PRO — scraper, 2 pieces. A bent edge for gradual work on the surface and the thickness of parts.
In stock
5.56 €
TamiyaTA74160

Modeler's Knife PRO Replacement Blade (Scriber, 5pcs.)

Tamiya Modeler's Knife PRO, replacement scriber blades (5 pcs) are thin scribing blades for engraving lines and for scoring plastic sheet to snap it apart.
In stock
5.56 €
TamiyaTA74159

Modeler's Knife PRO Replacement Blade (Narrow Chisel, 5pcs.)

Tamiya replacement blades for the Modeler's Knife PRO — narrow chisel, 5 pieces. Precise blades for cleaning up scribed surfaces and removing flash.
In stock
5.56 €
TamiyaTA74106

Hard Coated File PRO (Flat 6mm Width)

Tamiya Hard Coated File PRO (flat, 6 mm width) is a precision modeling file with a steel blade and a hard surface coating for sanding plastic and metal.
In stock
26.36 €
TamiyaTA74134

Fine Pivot Drill Bit - 1.0mm - 1.5mm

Fine drill bits with a pivot point in the range 1.0 to 1.5 mm. The point keeps the bit from running off the surface, so the hole begins exactly where it should.
In stock
3.96 €
TamiyaTA74133

Fine Pivot Drill Bit - 0.9mm - 1.5mm

Fine modeling drill bits with a pivot point in the range 0.9 to 1.5 mm. The point keeps the bit in place where the hole is meant to begin.
In stock
3.96 €
TamiyaTA74128

Fine Pivot Drill Bit 0.7mm (Shank Dia. 1.0mm)

Tamiya Fine Pivot Drill Bit 0.7 mm is a fine drill bit with a thickened shank of 1.0 mm diameter, intended for precise holes in plastic, resin and photo-etch.
In stock
4.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.