Wooden deck with masks and photo-etched parts for USS Yorktown CV-10 in 1:700 scale takes the place of the engraved flight deck of the kit with a real veneer with pre-printed plank laying. Meant for the Trumpeter 05729 kit.
A flight deck covering mask for USS Yorktown CV-10 in 1:700 scale is a pre-cut masking sheet with which you create sharp transitions between shades on the deck of the aircraft carrier without cutting tape by hand.
Wooden deck with masks and photo-etched parts for USS California BB-44 as of 1941 in 1:700 scale is an aftermarket set that gives the plastic deck of the kit a real veneer with pre-printed planks.
Wooden deck with covering masks and photo-etched parts for USS New York BB-34 in 1:700 scale brings together a self-adhesive veneer with pre-printed planks and metal details that take the place of engraved plastic at a thickness correct for the scale. Cut for the Trumpeter 06711 kit.
A deck covering mask for USS New York BB-34 in 1:700 scale is a pre-cut self-adhesive masking set with which you spray the deck areas of the kit with sharp edges and no laborious cutting. The set is meant for the Trumpeter 06711 kit.
Wooden deck with a covering mask for USS Tennessee BB-43 as of 1941 in 1:700 scale is an accessory for the Trumpeter 05781 plastic kit: a self-adhesive veneer with pre-printed plank laying that takes over from the engraved plastic surface.
Masking film for the deck 1:700 for the battleship HMS Nelson 1944 from Artwox Model is a pre-cut self-adhesive stencil with which you spray the deck instead of gluing veneer on. The cuts match the Trumpeter 06717 kit.
Wooden deck with masks and photo-etched parts 1:700 for the battleship HMS Prince of Wales from Artwox Model brings together a self-adhesive veneer with pre-printed plank laying, masking films and photo-etched parts in her December 1941 state. Meant for the Flyhawk FH1117S kit.
Wooden deck with masks and photo-etched parts 1:700 for the aircraft carrier USS Enterprise CV-6 from Artwox Model combines a self-adhesive veneer with pre-printed plank laying, masking films and photo-etched parts.
Masking film for the deck 1:700 for the aircraft carrier USS Enterprise CV-6 from Artwox Model is a set of finely cut self-adhesive stencils for spraying the deck areas. Meant for the Academy 14224 kit.
Wooden deck with masking film 1:350 for the aircraft carrier CV-10 Yorktown 1944 from Artwox Model brings a large-area veneer with pre-printed plank laying to the model.
Masking film for the deck 1:350 for the aircraft carrier CV-10 Yorktown 1944 from Artwox Model is a set of pre-cut stencils for spraying the flight deck with sharp transitions. Meant for the Trumpeter 05603 kit.
Masking film for the deck 1:350 for the Italian battleship Littorio 1941 from Artwox Model is a pre-cut self-adhesive stencil for cleanly separating the wooden and metal areas during spraying. The sheets are cut to the deck areas of the Trumpeter 05319 kit.
Wooden deck with masking film 1:350 for the battleship Scharnhorst 1940 from Artwox Model brings real veneer with pre-printed plank laying to the model instead of engraved plastic. Meant for the Dragon 1062 kit.
Wooden deck with masking film 1:350 for the German destroyer Z-32 from Artwox Model is a self-adhesive veneer with pre-printed plank laying that takes over from the engraved plastic of the original deck.
Masking film for the deck 1:350 for the German destroyer Z-32 from Artwox Model is a set of pre-cut self-adhesive stencils with which you separate the wooden areas of the deck from the metal ones without laboriously cutting strips. Cut for the Dragon 1065 kit.
1:350 Schleswig-Holstein 1908 - masking sheets for the deck are pre-cut self-adhesive masks for the plastic kit of the battleship in her 1908 version. The sheets are cut to the deck areas of the Trumpeter 05355 kit.
1:350 Poltava - wooden deck and masking sheets is an accessory set for the plastic kit of the Russian battleship: a veneer deck with a self-adhesive backing plus masks. Cut for the Zvezda 9060 kit.
1:350 Poltava - masking sheets for the deck are pre-cut self-adhesive masks for the plastic kit of the Russian battleship. It is neither a model nor paint. Meant for the Zvezda 9060 kit.
With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:
Always active
Necessary cookies
These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.
Analytical cookies
They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.
Marketing cookies
They collect information to better tailor advertising to your interests, both on and off this website.
To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.
