Build

2 416 products
Product filtering
up to €
U-STARUA90674

Large Area Flat Grinding Plate (1000#)

A flat sanding plate with a large working surface in grit 1000. It serves for leveling surfaces and gaps and for preparing the surface of a model for paint.
In stock
8.36 €
U-STARUA90673

Large Area Flat Grinding Plate (800#)

U-STAR large flat grinding plate 800 is a rigid sander with a large surface and a finer grit for sanding larger parts flat and smooth.
In stock
8.36 €
U-STARUA90672

Large Area Flat Grinding Plate (600#)

A large-area flat sanding plate with grit 600. It holds a plane along the whole length of a stroke and covers a wider piece of surface at once.
In stock
8.36 €
U-STARUA90671

Large Area Flat Grinding Plate (400#)

U-STAR large flat grinding plate 400 is a rigid sander with a large surface for sanding larger model parts flat.
In stock
8.36 €
U-STARUA90637

Mini Parallel-Jaw Viseu

A small modeling vise with parallel jaws. It holds a small part firmly in one position, so both of your hands stay free while you work.
In stock
21.96 €
U-STARUA90636

Spherical rotary Vise

The U-STAR rotary vise with a ball joint holds a part and at the same time makes it possible to tilt it to any angle. It suits anywhere work is done on places that are hard to reach.
In stock
87.56 €
U-STARUA90635

Handheld mini Vise

The U-STAR hand-held mini vise clamps a small part and you hold it in your hand like a tool. Drilling, sanding and gluing can then all be managed without touching the part with your fingers.
In stock
90.76 €
U-STARUA90633

Miniature Vise for the Model (2 in 1)

The U-STAR miniature modeling vise 2-in-1 clamps a small part firmly while drilling, sanding and gluing. The manufacturer makes it as a 2-in-1 version, that is, with two ways of using it.
In stock
58.76 €
U-STARUA90632

Mini Table Vise

A small bench vise for modeling work. It holds a small part firmly in place, so that you have both hands free for it.
In stock
75.56 €
U-STARUA90505

Flat Blade Knife 3 mm

U-STAR 3 mm flat blade knife is a modeling knife with a wider flat edge for cleaning up larger surfaces.
In stock
14.36 €
U-STARUA90504

Flat Blade Knife 2.5 mm

Flat Blade Knife 2.5 mm is a U-STAR flat scriber with an edge 2.5 mm wide. It is used for restoring engraved lines, for cleaning up straight edges and for removing small nubs on plastic.
In stock
14.36 €
U-STARUA90502

Flat Blade Knife 1.5 mm

U-STAR flat chisel 1.5 mm is a fine modeling knife with a flat edge for cleaning up and leveling surfaces.
In stock
14.36 €
U-STARUA90501

Flat Blade Knife 1 mm

A 1 mm flat chisel from U-STAR is an engraving tool with a straight edge 1 mm wide for work on panel lines, gaps and the edges of a model.
In stock
14.36 €
U-STARUA90290

Tungsten steel Drill Bit 1.0 mm

U-STAR tungsten drill bit 1.0 mm is a modeling micro drill bit of tungsten carbide for accurate drilling of holes in plastic, resin and metal.
In stock
1.56 €
U-STARUA90289

Tungsten steel Drill Bit 0.9 mm

The U-STAR tungsten drill bit 0.9 mm is a modeling micro drill bit in carbide for precise drilling in plastic, resin and metal.
In stock
1.56 €
U-STARUA90287

Tungsten steel Drill Bit 0.7 mm

The U-STAR tungsten carbide drill bit 0.7 mm is a precise modeling micro drill bit in carbide for drilling fine holes in plastic, resin and metal.
In stock
1.56 €
U-STARUA90224

Multifunctional PenKnife

Multifunctional PenKnife is a multipurpose U-STAR modeling knife with a slim pen-shaped handle. It is used for cutting, deburring and cleaning up plastic parts.
In stock
15.96 €
U-STARUA90208

Line Engraver with Wooden Handle (0.8 mm)

The U-STAR panel line scriber with a wooden handle (0.8 mm) is an accurate engraving tool for wider and more prominent panel lines.
In stock
6.36 €
U-STARUA90205

Line Engraver with Wooden Handle (0.5 mm)

The U-STAR panel line engraver with a wooden handle (0.5 mm) is a precise scribing tool for restoring and creating panel lines on a model.
In stock
6.36 €
U-STARUA90186

Bender for Etch shape modification piece (Pro version)

U-STAR photo-etch bender (larger, Pro) is a modeling tool for bending photo-etched parts precisely into three-dimensional shapes. The larger version handles even longer and bigger frets.
In stock
71.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.