20% OFF Sale Until Wednesday! 

MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO • HGW • DEAD DESIGN • FIRMA49 • KOVOZÁVODY PROSTĚJOV • AZ MODEL • RS MODELS

 Sale Ends Wednesday, November 11, 2026!

Order pickup point Prostějov · Tue–Fri 12:00–16:00info@mn-modelar.cz
Search

Stock Clearance

Take advantage of unique discounts - we are clearing our stock

6 062 products
← All categories Figures 387 Ships 256 Motorcycles 41 Aircraft 3349 Submarines 17 Military Vehicles 1048 Cars & Formula 246 Egg Models 19 Various 9 Helicopters 233 Dinosaurs 2 Space & Sci-Fi 460
Sort:
Product filtering
Sorting
Product filtering
up to €
1:48 F-86A Sabre Weighted wheels set type 2-25 %Stock Clearance
Clear Prop ModelsCPA480911:48

1:48 F-86A Sabre Weighted wheels set type 2

The rendition 1:48 F-86A Sabre Weighted wheels set type 2 from Clear Prop Models brings wheels with a flattened contact area, this time under the second type designation.
2 leftof 6
9.96 €7.48 € You save 2.48 €
1:48 F-86A Sabre Weighted wheels set type 1-25 %Stock Clearance
Clear Prop ModelsCPA480901:48

1:48 F-86A Sabre Weighted wheels set type 1

The set of wheels 1:48 F-86A Sabre Weighted wheels set type 1 from Clear Prop Models brings tires with the flattened footprint that arises under the weight of a standing aircraft.
2 leftof 6
9.96 €7.48 € You save 2.48 €
1:48 Sikorsky H-19 Chickasaw double-sided painting mask on-25 %Stock Clearance
Clear Prop ModelsCPA480751:48

1:48 Sikorsky H-19 Chickasaw double-sided painting mask on

Double-sided painting masks for the glazing of the Sikorsky H-19 Chickasaw helicopter in 1:48 scale.
5 leftof 6
9.96 €7.48 € You save 2.48 €
1:48 F-86A Sabre pre-cut patterns for numbers and lettering painting mask on yellow kabuki paper for CP4825 kit-25 %Stock Clearance
Clear Prop ModelsCPA480711:48

1:48 F-86A Sabre pre-cut patterns for numbers and lettering painting mask on yellow kabuki paper for CP4825 kit

Pre-cut masking stencils for numbers and lettering for a model of the F-86A Sabre in 1:48 scale, on yellow kabuki paper. Meant for the kit designated CP4825.
6 left
9.96 €7.48 € You save 2.48 €
1:48 F-86A Sabre Ejection seat early-25 %Stock Clearance
Clear Prop ModelsCPA480471:48

1:48 F-86A Sabre Ejection seat early

The ejection seat 1:48 F-86A Sabre Ejection seat early from Clear Prop Models will replace the cockpit equipment of the early version of the American jet fighter.
Last one!of 6
11.16 €8.36 € You save 2.80 €
1:48 Gloster E28/39 Pioneer engine set-25 %Stock Clearance
Clear Prop ModelsCPA480451:48

1:48 Gloster E28/39 Pioneer engine set

The engine set 1:48 Gloster E28/39 Pioneer engine set from Clear Prop Models opens up the powerplant of the first British jet aircraft.
5 leftof 6
26.76 €20.08 € You save 6.68 €
1:16 Soviet Navy orders and badges (1942-1945)-25 %Stock Clearance
Quinta StudioQM160131:16

1:16 Soviet Navy orders and badges (1942-1945)

Decorations and badges of the Soviet Navy 1942 to 1945 from Quinta Studio, prepared as three-dimensional decals for figures in 1:16 scale.
3 leftof 4
3.16 €2.36 € You save 0.80 €
Red Army military orders (1942-1945) pt.1-25 %Stock Clearance
Quinta StudioQM16010

Red Army military orders (1942-1945) pt.1

An accessory sheet with Soviet decorations for figures, the first part of the series. Small elements that will complete the chest of a Red Army soldier's uniform.
2 leftof 4
3.16 €2.36 € You save 0.80 €
1:9 - 1:10 Soviet Navy orders and badges (1942-1945)-25 %Stock Clearance
Quinta StudioQM100131:9

1:9 - 1:10 Soviet Navy orders and badges (1942-1945)

Orders and badges of the Soviet Navy from 1942 to 1945 from Quinta Studio in the form of three-dimensional decals for large figures around 1:9 and 1:10.
2 leftof 4
3.16 €2.36 € You save 0.80 €
1:9-1:10 Red Army military orders (1942-1945) pt.1-25 %Stock Clearance
Quinta StudioQM100101:9

1:9-1:10 Red Army military orders (1942-1945) pt.1

A set of three-dimensional colored decals with Soviet orders from 1942 to 1945 from Quinta Studio, cut for large figures and busts around 1:9 and 1:10 scale.
2 leftof 4
3.16 €2.36 € You save 0.80 €
1:48 GRU-7A late, 2 ejection seats for F-14 A/F-14B (Hasegawa, GWH)-25 %Stock Clearance
Quinta StudioQR+480941:48

1:48 GRU-7A late, 2 ejection seats for F-14 A/F-14B (Hasegawa, GWH)

The late pattern 1:48 GRU-7A late, 2 ejection seats for F-14 A/F-14B from Quinta Studio is cut for the Hasegawa and Great Wall Hobby kits.
2 leftof 4
18.76 €14.08 € You save 4.68 €
1:48 GRU-7A early, 2 ejection seats for F-14 A (Tamiya, Hobby Boss)-25 %Stock Clearance
Quinta StudioQR+480911:48

1:48 GRU-7A early, 2 ejection seats for F-14 A (Tamiya, Hobby Boss)

The pair of seats 1:48 GRU-7A early, 2 ejection seats for F-14 A from Quinta Studio is cut for the Tomcat kits of the Tamiya and Hobby Boss brands.
2 leftof 4
18.76 €14.08 € You save 4.68 €
1:35 NATO 7.62 ammunition belts (All kits)-25 %Stock Clearance
Quinta StudioQD351301:35

1:35 NATO 7.62 ammunition belts (All kits)

The color-rendered 1:35 NATO 7.62 ammunition belts from Quinta Studio will complete machine guns, ammunition boxes and equipment on models in 1:35 scale.
2 leftof 10
16.36 €12.28 € You save 4.08 €
1:32 A-26C Invader 3D-Printed & coloured Interior on decal paper (Hobby Boss) (Small version)-25 %Stock Clearance
Quinta StudioQDS322501:32

1:32 A-26C Invader 3D-Printed & coloured Interior on decal paper (Hobby Boss) (Small version)

1:32 A-26C Invader - a colored interior on decal paper from Quinta Studio over the smaller extent of the set. An accessory for a large model of the American attack machine with a glazed nose.
4 left
37.16 €27.88 € You save 9.28 €
1:32 F-104A 3D-Printed & coloured Interior on decal paper (Italeri) (Small version)-25 %Stock Clearance
Quinta StudioQDS322461:32

1:32 F-104A 3D-Printed & coloured Interior on decal paper (Italeri) (Small version)

An F-104A Starfighter interior in 1:32 in a reduced scope from Quinta Studio contains printed colored cockpit equipment on decal film in a leaner selection than the full set. Intended for the Italeri kit.
2 leftof 4
18.76 €14.08 € You save 4.68 €
1:32 F-104A 3D-Printed & coloured Interior on decal paper (Italeri)-25 %Stock Clearance
Quinta StudioQD322461:32

1:32 F-104A 3D-Printed & coloured Interior on decal paper (Italeri)

A colored interior of the Lockheed F-104A Starfighter fighter, 1:32 from Quinta Studio holds cockpit equipment printed on paper for wet decals. Intended for the Italeri kit.
3 leftof 4
43.16 €32.36 € You save 10.80 €
1:48 AH-64A 3D-Printed & coloured Interior on decal paper (Academy/Modelist) (small version)-25 %Stock Clearance
Quinta StudioQDS485721:48

1:48 AH-64A 3D-Printed & coloured Interior on decal paper (Academy/Modelist) (small version)

The smaller interior set 1:48 AH-64A (Academy/Modelist) (small version) from Quinta Studio offers finished colored elements of the Apache cockpit over a narrower extent.
4 left
12.76 €9.56 € You save 3.20 €
1:48 Boeing B-17G 3D-Printed & coloured Interior on decal paper (HK models) (small version)-25 %Stock Clearance
Quinta StudioQDS485611:48

1:48 Boeing B-17G 3D-Printed & coloured Interior on decal paper (HK models) (small version)

The interior of the Boeing B-17G bomber 1:48, color 3D print on a paper carrier from Quinta Studio in the smaller extent. It adds raised and colored details to the crew stations.
2 leftof 4
29.96 €22.48 € You save 7.48 €
1:48 Bristol Beaufighter Mk.VI 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)-25 %Stock Clearance
Quinta StudioQDS485541:48

1:48 Bristol Beaufighter Mk.VI 3D-Printed & coloured Interior on decal paper (Tamiya) (small version)

Bristol Beaufighter Mk.VI 1:48 - colored 3D cockpit details on a paper carrier , the smaller extent of the set from Quinta Studio. It will replace the flat details of the pilot's and the operator's stations. The set is intended for the Tamiya kit.
2 leftof 4
14.76 €11.08 € You save 3.68 €
1:48 Fairey Fulmar Mk.II 3D-Printed & coloured Interior on decal paper (Trumpeter) (small version)-25 %Stock Clearance
Quinta StudioQDS485341:48

1:48 Fairey Fulmar Mk.II 3D-Printed & coloured Interior on decal paper (Trumpeter) (small version)

The carrier fighter Fairey Fulmar Mk.II 1:48, colored interior details from 3D printing , which Quinta Studio supplies on a paper carrier. The smaller extent of the set aims at the most visible parts of both cabins.
3 leftof 4
12.76 €9.56 € You save 3.20 €
Load more products
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Save Settings Enable All

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.

Settings Reject all I agree