Aircraft

37 721 products
Product filtering
up to €
SX-ArtSXA481261:48

1:48 Fairey Gannet AS.1/AS.4 (Airfix)

A set of masks for painting a model of the Fairey Gannet AS.1 and AS.4 carrier aircraft in 1:48 scale, cut for the Airfix kit.
In stock
5.96 €
SX-ArtSXA440291:144

1:144 Paint mask Su-25 (ZVE)

A set of masks for the glazing of a Su-25 attack aircraft model in 1:144 scale. The ready-made outlines shorten the preparation before spraying camouflage to a few minutes.
In stock
3.56 €
SX-ArtSXA440271:144

1:144 Paint mask IL-86 (ZVE)

A self-adhesive masking set for a model of the Soviet Il-86 wide-body airliner in 1:144 scale. It serves for spraying the cockpit glazing precisely, without laborious brush work.
In stock
4.76 €
SX-ArtSXA440231:144

1:144 Paint mask Mig-29 (ZVE)

A masking set for the glazing of a MiG-29 fighter model in 1:144 scale. The ready-made shapes keep the canopy frame straight even after several coats of varnish.
In stock
3.56 €
SX-ArtSXA440161:144

1:144 Paint mask Tu-134 (ZVE)

A self-adhesive masking set for a model of the Soviet Tu-134 airliner in 1:144 scale. It serves for spraying the cockpit windows and the other glazing accurately without laborious work with a brush.
In stock
4.76 €
SX-ArtSXA440131:144

1:144 Paint mask Tu-160 (ZVE)

A painting mask for the glazing of a Tupolev Tu-160 bomber model in 1:144 scale. The die-cut shapes replace the lengthy taping of a small cockpit.
In stock
4.76 €
OmaskOMK73212

OMK73212

Landing gear bay plugs for a model of the Messerschmitt Bf 109 K in 1:32 scale from Kotare. They cover the open bays for the time of spraying.
In stock
3.20 €
OmaskOMK470091:72

1:72 Bf 109G-6 camo mask for Barkhorn wing

Camouflage masks 1:72 Bf 109G-6 - Barkhorn wing are precisely cut self-adhesive masks for spraying the camouflage pattern onto the wings of the fighter in 1:72 scale.
In stock
8.36 €
OmaskOMK440131:48

1:48 SE.5a otline wing masks (for Eduard)

A set of wing masks for a model of the British SE.5a fighter biplane in 1:48 scale, cut for the Eduard kit.
In stock
7.56 €
OmaskOMK440121:48

1:48 Bf 109G-6 camo mask for Barkhorn wing

Camouflage masks 1:48 Bf 109G-6 - Barkhorn wing are precisely cut self-adhesive masks for spraying the camouflage pattern onto the wings of the fighter in 1:48 scale.
In stock
9.16 €
New WareNWAM13301:72

1:72 F-4B Phantom II EXPERT kabuki masks

1:72 F-4B Phantom II – the Expert masking set is an accessory to a plastic kit, not a model. The kabuki paper masks cover the glazing and other surfaces during spraying.
In stock
7.96 €
New WareNWAM13291:72

1:72 F-4B Phantom II ADVANCED kabuki masks

The middle ADVANCED level of kabuki masks for the F-4B Phantom II in 1:72 scale. A wider scope than the entry variant for the same machine.
In stock
7.96 €
New WareNWAM13281:72

1:72 F-4B Phantom II BASIC kabuki masks

The BASIC entry level of kabuki masks for the F-4B Phantom II carrier fighter in 1:72 scale. Die-cut shapes for the small cockpit frames.
In stock
4.76 €
New WareNWAM13271:48

1:48 B-26G Marauder EXPERT kabuki masks

Pre-cut masking templates of kabuki paper tape for a model of the B-26F Marauder bomber in 1:48 scale, in the form designated EXPERT.
In stock
10.36 €
New WareNWAM13261:48

1:48 B-26F Marauder BASIC kabuki masks

The BASIC entry level of kabuki masks for the B-26F Marauder medium bomber in 1:48 scale. Die-cut shapes for the glazed nose and the cockpit.
In stock
8.76 €
New WareNWAM13251:48

1:48 F-5E Tiger III EXPERT kabuki masks

Kabuki painting masks for the F-5E Tiger fighter in 1:48 scale, the EXPERT rendition. Masks for the glazing including the inner side, for further parts and for the wheels.
In stock
7.16 €
New WareNWAM13241:48

1:48 F-5E Tiger III ADVANCED kabuki masks

A masking set at the ADVANCED level for the upgraded F-5E Tiger III, 1:48 scale. A scope between the entry and the top level.
In stock
7.16 €
New WareNWAM13231:48

1:48 F-5E Tiger III BASIC kabuki masks

The BASIC entry level of kabuki masks for the Chilean F-5E Tiger III upgrade in 1:48 scale. The simplest way to get the cockpit frames into sharp lines.
In stock
4.76 €
3DF3DF1072461:72

1:72 Seat for Fw 190A/F with belts

3DF 1:72 seat for the Fw 190A/F with belts is a 3D-printed detail accessory for the pilot's seat with integrated harness for models of the Fw 190A/F fighters.
In stock
4.36 €
3DF3DF1048721:48

1:48 Seat for Fw 190A/F with belts

The 3DF 1:48 seat for the Fw 190A/F with belts is a 3D-printed detail accessory, a pilot seat with integral belts for models of the Fw 190A/F fighters.
In stock
5.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.