Aircraft Decals 1:72

1 937 products
Product filtering
up to €
EduardEDD720551:72

1:72 MiG-21bis stencils

The sheet 1:72 MiG-21bis stencils by Eduard brings the small technical and warning markings that covered the surfaces of the Soviet fighter.
In stock
6.80 €
Special HobbySHK720321:72

1:72 Heinkel He 59B/D In Finland DECAL

1:72 Heinkel He 59B/D in Finland - a Special Hobby decal set is a separate decal sheet for a plastic kit, not a model. It is intended for the He 59B and He 59D versions.
In stock
6.76 €
1:72 DH.88 Comet G-ACSR MacRobertson Trophy Air Race-25 %Stock ClearanceFavorite
Clear Prop ModelsCPD480041:72

1:72 DH.88 Comet G-ACSR MacRobertson Trophy Air Race

Decals for the model of the de Havilland DH.88 Comet racing aircraft with the registration G-ACSR from the MacRobertson Trophy race, scale 1:72.
3 leftof 6
9.96 €7.48 € You save 2.48 €
Old PropellerOPD720091:72

1:72 4 Color interior Lozenge (Very faded)

The four-color variant of the lozenge for interior surfaces 1:72, very faded from Old Propeller. Printed covering in a muted coloring for places out of direct light.
In stock
7.56 €
Old PropellerOPD720081:72

1:72 5 Color interior Lozenge (Very faded)

The five-color lozenge for interior surfaces 1:72 in a very faded version from Old Propeller. A factory print of the fabric in a tone matching cloth seen through from the inside.
In stock
7.56 €
Old PropellerOPD720041:72

1:72 Rib tapes for Lozenge - 2 color types

Rib tapes for lozenge 1:72 - two color types from Old Propeller. They complete the printed fabric on the wings of German aircraft of the First World War.
In stock
2.36 €
Quinta StudioQDS721991:72

1:72 Bristol Beaufighter Mk.21 3D-Printed & coloured Interior on decal paper (Hasegawa/MPM) (small version)

A reduced extent of the colored interior set for the Beaufighter Mk.21 in 1:72 scale, printed three-dimensionally on decal paper.
In stock
7.56 €
1:72 Bristol Beaufighter Mk.21 3D-Printed & coloured Interior on decal paper (Hasegawa/MPM)-25 %Stock ClearanceFavorite
Quinta StudioQD721991:72

1:72 Bristol Beaufighter Mk.21 3D-Printed & coloured Interior on decal paper (Hasegawa/MPM)

The Australian Beaufighter Mk.21 gets a colored three-dimensional interior on a paper carrier from Quinta Studio, 1:72 scale.
Last one!of 10
12.76 €9.56 € You save 3.20 €
Quinta StudioQDS721981:72

1:72 Bristol Beaufighter Mk.X 3D-Printed & coloured Interior on decal paper (Hasegawa) (small version)

Quinta Studio 1:72 Bristol Beaufighter Mk.X 3D interior decals (small version) are colored 3D-printed cockpit decals on a decal paper carrier in a reduced extent for models of the British strike Beaufighter Mk.X. The target kit: Hasegawa.
In stock
7.56 €
Quinta StudioQD721971:72

1:72 Bristol Beaufighter Mk.VI 3D-Printed & coloured Interior on decal paper (Hasegawa/MPM/Hobby2000)

A pre-colored 3D interior decal for the Bristol Beaufighter Mk.VI in 1:72 scale from Quinta Studio - a relief cockpit decal for the Hasegawa, Hobby 2000 and MPM kits. It is not an aircraft model.
In stock
12.76 €
Quinta StudioQDS721961:72

1:72 Bristol Beaufighter Mk.I 3D-Printed & coloured Interior on decal paper (Hasegawa/MPM/Hobby2000) (small version)

Quinta Studio 1:72 Bristol Beaufighter Mk.I 3D interior decals (small version) are colored 3D printed cockpit decals on carrier decal paper in a reduced scope for models of the British Beaufighter Mk.I fighter.
In stock
7.56 €
Quinta StudioQD721961:72

1:72 Bristol Beaufighter Mk.I 3D-Printed & coloured Interior on decal paper (Hasegawa/MPM/Hobby2000)

Quinta Studio 1:72 Bristol Beaufighter Mk.I 3D interior decals are colored 3D-printed interior decals on a decal paper carrier for models of the British heavy fighter Beaufighter Mk.I.
In stock
12.76 €
Quinta StudioQD721861:72

1:72 F-15C Early/J Early 3D-Printed & coloured Interior on decal paper (Fine Molds)

Quinta Studio 1:72 F-15C Early/J Early 3D interior decals are color 3D-printed cockpit decals on backing decal paper for models of the F-15 Eagle air superiority fighter in its early versions.
In stock
12.76 €
Quinta StudioQD721811:72

1:72 P-51D Mustang Early 3D-Printed & coloured Interior on decal paper (Eduard)

The pilot's compartment of the Mustang in the P-51D Early version from Quinta Studio - colored three-dimensional details printed on decal paper, 1:72 scale. The set is intended for the Eduard kit.
In stock
10.36 €
Quinta StudioQD721791:72

1:72 Bf 110C/D/E 3D-Printed & coloured Interior on decal paper (Eduard)

Colored three-dimensional interior elements for the Bf 110C, D and E in 1:72 scale, prepared for the Eduard kit. The elements are on decal paper.
In stock
13.56 €
Quinta StudioQD+721771:72

1:72 Su-30MKK 3D-Printed & coloured Interior on decal paper (Trumpeter) (with 3D-printed resin part)

Quinta Studio 1:72 Su-30MKK 3D interior decals are color 3D-printed cockpit decals on backing decal paper with an added 3D-printed resin part for models of the two-seat Su-30MKK multirole fighter. Target kit: Trumpeter.
In stock
16.36 €
Quinta StudioQD721761:72

1:72 B-26B Marauder 3D-Printed & coloured Interior on decal paper (Hasegawa/ Eduard/ Hobby2000)

A pre-colored B-26B Marauder interior 3D decal in 1:72 scale from Quinta Studio, an embossed cockpit decal for the Hasegawa, Eduard and Hobby 2000 kits. It is not an aircraft model.
In stock
12.76 €
Quinta StudioQDS721731:72

1:72 Blackburn Buccanneer S.2B Late 3D-Printed & coloured Interior on decal paper (Airfix) (small version)

Quinta Studio 1:72 Blackburn Buccaneer S.2B Late 3D interior decals (small version) are color 3D printed cockpit decals on backing paper for models of the British Buccaneer S.2B strike aircraft.
In stock
12.76 €
Quinta StudioQD721721:72

1:72 Blackburn Buccanneer S.2B Early 3D-Printed & coloured Interior on decal paper (Airfix)

Colored 3D printed interior elements for the Blackburn Buccaneer S.2B in the early finish, shaped for the Airfix kit in 1:72 scale. The elements are on decal paper.
In stock
16.36 €
Quinta StudioQDS721681:72

1:72 Su-17M3 3D-Printed & coloured Interior on decal paper (Modelsvit) (small version)

Quinta Studio 1:72 Su-17M3 3D interior decals (small version) are color 3D-printed cockpit decals on backing paper for models of the Soviet Su-17M3 fighter-bomber. Target kit: Modelsvit.
In stock
9.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.