29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:48 LUFTWAFFE BALKENKREUZE MID - PART III

Armycast 1:48 Luftwaffe Balkenkreuze, middle version — part III is a set of die-cut self-adhesive masking templates for spraying the national insignia of Luftwaffe aircraft in the middle variant. It is the third part of this variant.

Scale1:48
Manufacturer Armycast
Product EAN8591111615563

Responsibility details are not available.

9.40 €
7.77 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Armycast 1:48 — masks for Luftwaffe national insignia, middle version, part III

A masking set in 1:48 scale from the Czech maker Armycast. The self-adhesive sheets carry machine-cut shapes of the national insignia of the Luftwaffe, the so-called Balkenkreuz, in the middle variant. This item is the third part of the variant; the maker split it into several separately sold parts, which differ in the sizes and the rendering of the individual insignia.

The markings

The Balkenkreuz was placed on the sides of the fuselage and on the upper and lower wing surfaces. The shape of the insignia went through a development during the war: the early rendering has a solid black center with a broad white border, while in the later ones the white area narrows and the whole insignia is simplified. The middle variant corresponds to the middle phase of the period. The period-correct variant of the insignia is one of the most conspicuous details by which a carefully built model can be recognized.

Procedure and application tips

The paint under the mask has to be dry, smooth and degreased. Transfer the template with tweezers or the tip of a knife, position it precisely and press the edges down with a wooden stick, including in the corners. Spray several very thin coats at right angles to the surface and let them dry in between; spraying at an angle makes the paint creep under the edge. With a two-color insignia you work in layers — the light area first, then the remaining pieces of the mask are added and the dark center is oversprayed. Lift the mask off soon after it has dried by pulling back over itself at a sharp angle and check straight away whether a small cutout of the template has stayed behind in the finish.

Who the set is for

  • builders of German aircraft from the middle phase of the war in 1:48 scale
  • modelers who want to spray the markings instead of using decals
  • those who are adding missing sizes of the insignia to the other parts of the line
  • builders of models with a pronounced patina to the finish

The package holds masking templates only. Paints, varnish and the model are not part of it.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. These are masking templates — they are stuck on a painted model, the paint is sprayed over them and then they are lifted off.

It is not necessary; each part is sold separately. What matters is which sizes of the insignia you need on your model.

A sprayed marking has no carrier film, so it does not silver and has no visible edge. It follows rivets and engraved lines and can be weathered like the surrounding finish.

Check whether any of the small inner cutouts of the template has stayed behind in the finish.

Last seen

ArmycastACM490351:48

1:48 LUFTWAFFE BALKENKREUZE MID - PART III

Armycast 1:48 Luftwaffe Balkenkreuze, middle version — part III is a set of die-cut self-adhesive masking templates for spraying the national insignia of Luftwaffe aircraft in the middle variant. It is the third part of this variant.
In stock
9.40 €
Mr.PaintMRPC006

FORD GT Med. Royal Blue

Ford GT Medium Royal Blue is a lacquer modeling paint ready for airbrush spraying in a medium royal blue.
In stock
5.96 €
Green Stuff WorldGSW5623

Neodymium Magnets 5x2mm - 100 units

Neodymium magnets 5x2 mm are a package of 100 strong magnets for modeling and wargaming use.
In stock
15.96 €
GasPatch modelsGP15-320851:32

1:32 Browning .50 Caliber Flexible Machine Guns (2pcs, Resin)

A resin set of Browning .50 caliber (12.7 mm) aircraft machine guns in the flexible form, 1:32 scale from GasPatch. The package holds two pieces for detailing aircraft kits.
In stock
13.56 €
AiresAIR73651:72

1:72 Wellington wheels & paint masks (late)

Aires Wellington – wheels and painting masks (late version) 1:72 is a detail accessory: resin replacement wheels for Vickers Wellington models plus masks for clean painting. It is not an airplane kit.
In stock
5.20 €
Aires/QuickboostQB488531:48

1:48 Su-27 Flanker front wheel fender - early

Quickboost 1:48 Su-27 Flanker front wheel fender, early version is an accessory set that replaces the coarsely molded plastic part with a fine casting.
In stock
4.76 €
AZ modelAZA70231:72

1:72 Bf 109G/K nose spiral decal

A decal set of propeller spinner spirals for the Bf 109G/K in 1:72 scale from AZ model . It is NOT an airplane model but a set of decals (markings) to complete your own kit. An airplane model is not included.
In stock
4.76 €
EduardED4810441:48

1:48 Mikoyan MiG-15 landing flaps

The Eduard 1:48 Mikoyan MiG-15 landing flaps photo-etched set is an etched accessory for the landing flaps of a 1:48 MiG-15 model. It lets you build the flaps lowered; it is not a kit.
In stock
14.44 €
Aires/QuickboostQB491681:48

1:48 SEPECAT Jaguar GR.1/GR.1a - Upper Pylons with Adapters Airfix

1:48 upper pylons with adapters for the SEPECAT Jaguar GR.1/GR.1a from Quickboost is a resin set of pylons for refining a Jaguar model.
In stock
6.36 €
OWLOWLDS720421:72

1:72 He 219 V-5 DH+PU (late)

1:72 He 219 V-5 DH+PU (late) is an OWL decal sheet for a model of the Heinkel He 219 prototype in its late state, as the machine carried it with the factory code DH+PU.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.