Aircraft Masks 1:48

4 177 products
Product filtering
up to €
Dead DesignNM481541:48

1:48 F-4G Phantom II In And Out (MENG)

1:48 F-4G Phantom II In And Out is a double-sided masking set for the glazing of the cabin from Dead Design. The templates cover the inner and the outer side of the canopy, so the frame can be sprayed before the cabin is glued to the fuselage. Target kit: Meng.
In stock
10.76 €
Dead DesignNM481531:48

1:48 F-4G Phantom II canopy mask

1:48 F-4G Phantom II canopy mask is a set of masking templates for the glazing of the cabin from Dead Design. The templates are cut exactly to the shape of the frame, so the cutting of masking tape by hand is done away with.
In stock
7.96 €
Dead DesignNM481521:48

1:48 Sea/Hurricane Mk.I National Insignias And Markings (Airfix)

Dead Design 1:48 Sea Hurricane Mk.I National Insignias And Markings is a set of masks for the national insignia and the markings for a model of the carrier-borne version of the Hurricane in 1:48 scale. Instead of decals the insignia are sprayed, so no carrier film is left on the model.
In stock
7.16 €
Dead DesignNM481501:48

1:48 Sea Hurricane Mk.I canopy masks

The set of glazing masks Sea Hurricane Mk.I in 1:48 scale from Dead Design. The ready-made parts take the place of the lengthy tracing of narrow frames with a scalpel in masking tape.
In stock
6.36 €
Dead DesignNM481491:48

1:48 Hawker Hurricane Mk.IIC national insignia

A masking set for the national insignia of the Hawker Hurricane Mk.IIc aircraft in 1:48 scale . The insignia is sprayed through the template straight onto the camouflage.
In stock
7.16 €
Dead DesignNM481481:48

1:48 Hurricane Mk.IIC canopy frame paint mask (inside and outside)

Masking templates for the frame of the glazing of the Hurricane Mk.IIc in 1:48 scale in the version for the inner and the outer side. The frame then looks right from the interior too.
In stock
8.76 €
Dead DesignNM481471:48

1:48 Hurricane Mk.IIc canopy masks

Masking templates for the frame of the glazing of the cabin of the Hawker Hurricane Mk.IIc in 1:48 scale . They last on the part through the whole painting cycle from the interior right to the top camouflage.
In stock
6.36 €
Dead DesignNM481451:48

1:48 OV-10А Bronco US NAVY canopy frame paint mask (inside and outside)

Masks for the framing of the cabin for a model of the OV-10A Bronco in the form for the US Navy, scale 1:48, for the outer and the inner side.
In stock
10.76 €
Dead DesignNM481441:48

1:48 OV-10А Bronco US NAVY

A masking set for a model of the OV-10A Bronco in the form for the US Navy, scale 1:48.
In stock
7.96 €
Dead DesignNM481371:48

1:48 F-4E Phantom II National Insignias And Marking (MENG)

1:48 F-4E Phantom II National Insignias And Marking is a set of masking templates for the national insignia and the markings. Instead of a decal being stuck on, the insignia is sprayed straight onto the airframe of a model. The set is intended for the Meng kit.
In stock
7.16 €
Dead DesignNM481351:48

1:48 F-4E Phantom II (MENG)

Glazing masks for the cabin of the McDonnell Douglas F-4E Phantom II in 1:48 scale cover the clear areas and uncover only the framing. Target kit: Meng.
In stock
7.96 €
Dead DesignNM481331:48

1:48 OV-10A Bronco MARINES In And Out (ICM)

The set of glazing masks OV-10A Bronco Marines 1:48 for the inner and the outer side from Dead Design. Thanks to it the frame of the cabin can be sprayed from both sides, so it looks right even when seen into the interior. Target kit: ICM.
In stock
10.76 €
Dead DesignNM481321:48

1:48 OV-10A Bronco MARINES (ICM)

The set of glazing masks OV-10A Bronco Marines in 1:48 scale from Dead Design. The precisely cut parts cover the glazing of the cabin, so the frames can be sprayed without cutting tape by hand. Intended for the ICM kit.
In stock
7.96 €
Dead DesignNM481291:48

1:48 F4F-4 Wildcat (Eduard)

Pre-cut masking templates for the frame of the glazing of the cabin of the F4F-4 Wildcat in 1:48 scale . They cover the areas of glass and leave only the frame uncovered, which is then sprayed in the same color as the airframe of the model. Intended for the Eduard kit.
In stock
7.16 €
Dead DesignNM481221:48

1:48 A-1H/J Skyraider

A masking set for a model of the Douglas A-1H/J Skyraider aircraft in 1:48 scale. The masks are stuck onto a dried base before spraying and taken off again once the paint has dried.
In stock
7.16 €
Dead DesignNM481201:48

1:48 F-82E/H Twin Mustang In&Out

1:48 F-82E/H Twin Mustang In and Out is a double-sided masking set for the glazing of the cabins from Dead Design. It covers the inner and the outer side of the canopies, which comes in handy especially when the cabin is to be open.
In stock
10.76 €
Dead DesignNM481191:48

1:48 F-82E/H Twin Mustang

1:48 F-82E/H Twin Mustang is a set of masking templates for the glazing of the cabins from Dead Design. The Twin Mustang has two cabins, so masking with tape cut by hand takes twice the time here.
In stock
7.56 €
Dead DesignNM481181:48

1:48 Forw. Base Nat. Ins. AH-1G+OV-10A

A masking set for the national insignia of the AH-1G and OV-10A machines in 1:48 scale . Instead of a decal the insignia is sprayed, so it has no carrier film and does not silver.
In stock
9.56 €
Dead DesignNM481121:48

1:48 F4F-3 Wildcat Nat. Ins

A set of national insignia masks for a model of the carrier-borne fighter aircraft Grumman F4F-3 Wildcat in 1:48 scale. The insignia are sprayed, not applied as a decal.
In stock
7.16 €
Dead DesignNM481111:48

1:48 F4F-3 Wildcat In&Out

1:48 F4F-3 Wildcat In and Out is a double-sided masking set for the glazing of the cabin from Dead Design. With it the inner side of the frame can be sprayed in the interior shade, which on carrier-borne aircraft is different from the color of the airframe.
In stock
9.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.