Masks

8 448 products
Product filtering
up to €
Dead DesignNM720541:72

1:72 P-39Q Airacobra conopy masks

A masking set for the glazing of a model of the fighter Bell P-39Q Airacobra in 1:72 scale. The masks are stuck onto the frames of the glazing before spraying and taken off once the paint has dried.
In stock
7.16 €
Dead DesignNM720521:72

1:72 Fw 190D (both canopies) canopy mask

Dead Design 1:72 Fw 190D (both canopies) canopy mask is a set of pre-cut masks for the glazing of the cabin of the Focke-Wulf Fw 190D in 1:72 scale. According to the name it reckons with both forms of the canopy that were used on this version.
In stock
7.16 €
Dead DesignNM720511:72

1:72 Lightning F. Mk.6 Nat. Ins

National insignia masks for the Lightning F. Mk.6 in 1:72 scale from the Dead Design brand. Instead of a decal the insignia is sprayed, so it has no carrier film and cannot silver.
In stock
7.16 €
Dead DesignNM720501:72

1:72 Lightning F. Mk.6 canopy mask

A glazing masking set for the Lightning F. Mk.6 in 1:72 scale from the Dead Design brand. The cut shapes follow the frame of the cabin, so it can be sprayed without the paint flowing onto the clear area.
In stock
7.16 €
Dead DesignNM720491:72

1:72 Buccaneer S.2C Nat. Ins

National insignia masks Buccaneer S.2C in 1:72 scale from Dead Design make it possible to spray the roundels instead of sticking decals on, so no carrier film is left on the model.
In stock
7.16 €
Dead DesignNM720481:72

1:72 Buccaneer S.2C canopy mask

The glazing mask Buccaneer S.2C in 1:72 scale from Dead Design is a pre-cut self-adhesive set that covers the glass of the cabin and leaves only the frame free for spraying.
In stock
7.96 €
Dead DesignNM720471:72

1:72 Tornado GR 1 canopy mask

The set 1:72 Panavia Tornado GR.1 - glazing masks covers the panes of the canopy of the tandem cabin. The frames stay free, so they can be sprayed together with the camouflage of the airframe.
In stock
7.96 €
Dead DesignNM720461:72

1:72 Tornado IDS canopy mask

Masks for the glazing of the cabin for a model of the Tornado IDS in 1:72 scale. The extent of the set and the target kit is given in the manufacturer's instructions.
In stock
7.96 €
Dead DesignNM481541:48

1:48 F-4G Phantom II In And Out (MENG)

1:48 F-4G Phantom II In And Out is a double-sided masking set for the glazing of the cabin from Dead Design. The templates cover the inner and the outer side of the canopy, so the frame can be sprayed before the cabin is glued to the fuselage. Target kit: Meng.
In stock
10.76 €
Dead DesignNM481531:48

1:48 F-4G Phantom II canopy mask

1:48 F-4G Phantom II canopy mask is a set of masking templates for the glazing of the cabin from Dead Design. The templates are cut exactly to the shape of the frame, so the cutting of masking tape by hand is done away with.
In stock
7.96 €
Dead DesignNM481521:48

1:48 Sea/Hurricane Mk.I National Insignias And Markings (Airfix)

Dead Design 1:48 Sea Hurricane Mk.I National Insignias And Markings is a set of masks for the national insignia and the markings for a model of the carrier-borne version of the Hurricane in 1:48 scale. Instead of decals the insignia are sprayed, so no carrier film is left on the model.
In stock
7.16 €
Dead DesignNM481501:48

1:48 Sea Hurricane Mk.I canopy masks

The set of glazing masks Sea Hurricane Mk.I in 1:48 scale from Dead Design. The ready-made parts take the place of the lengthy tracing of narrow frames with a scalpel in masking tape.
In stock
6.36 €
Dead DesignNM481491:48

1:48 Hawker Hurricane Mk.IIC national insignia

A masking set for the national insignia of the Hawker Hurricane Mk.IIc aircraft in 1:48 scale . The insignia is sprayed through the template straight onto the camouflage.
In stock
7.16 €
Dead DesignNM481481:48

1:48 Hurricane Mk.IIC canopy frame paint mask (inside and outside)

Masking templates for the frame of the glazing of the Hurricane Mk.IIc in 1:48 scale in the version for the inner and the outer side. The frame then looks right from the interior too.
In stock
8.76 €
Dead DesignNM481471:48

1:48 Hurricane Mk.IIc canopy masks

Masking templates for the frame of the glazing of the cabin of the Hawker Hurricane Mk.IIc in 1:48 scale . They last on the part through the whole painting cycle from the interior right to the top camouflage.
In stock
6.36 €
Dead DesignNM481451:48

1:48 OV-10А Bronco US NAVY canopy frame paint mask (inside and outside)

Masks for the framing of the cabin for a model of the OV-10A Bronco in the form for the US Navy, scale 1:48, for the outer and the inner side.
In stock
10.76 €
Dead DesignNM481441:48

1:48 OV-10А Bronco US NAVY

A masking set for a model of the OV-10A Bronco in the form for the US Navy, scale 1:48.
In stock
7.96 €
Dead DesignNM481371:48

1:48 F-4E Phantom II National Insignias And Marking (MENG)

1:48 F-4E Phantom II National Insignias And Marking is a set of masking templates for the national insignia and the markings. Instead of a decal being stuck on, the insignia is sprayed straight onto the airframe of a model. The set is intended for the Meng kit.
In stock
7.16 €
Dead DesignNM481351:48

1:48 F-4E Phantom II (MENG)

Glazing masks for the cabin of the McDonnell Douglas F-4E Phantom II in 1:48 scale cover the clear areas and uncover only the framing. Target kit: Meng.
In stock
7.96 €
Dead DesignNM481331:48

1:48 OV-10A Bronco MARINES In And Out (ICM)

The set of glazing masks OV-10A Bronco Marines 1:48 for the inner and the outer side from Dead Design. Thanks to it the frame of the cabin can be sprayed from both sides, so it looks right even when seen into the interior. Target kit: ICM.
In stock
10.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.