A 1.4 mm cone rivet from the brand GAS HANS is intended for the large scales. The box holds a round hundred printed heads, and the mounting hole is drilled at eight tenths of a millimeter.
A robust 1.2 mm cone rivet from GAS HANS holds 144 printed heads. The hole for seating it is seven tenths of a millimeter and the head already forms a pronounced element of relief on a surface.
One hundred and ninety-six cone rivets 1.0 mm across from the brand GAS HANS. It is the most generously filled box among the cone rivets from a millimeter up, and the mounting hole is 0.6 mm.
A 0.9 mm cone rivet is a printed accessory for heavy riveted structures. The brand GAS HANS supplies it in boxes of 128; the hole for seating it is six tenths of a millimeter.
A rivet with a 0.8 mm cone head from the manufacturer GAS HANS brings 162 printed heads. The mounting hole is five tenths of a millimeter, so the same drill as for the smaller variant will do.
A 0.7 mm armored cone rivet from the brand GAS HANS holds 171 printed heads, the most of all the sizes offered from seven tenths of a millimeter up. The hole is drilled at 0.5 mm.
Bullet-Proof Cone Rivet 0.6 mm is a set of standalone imitations of armor rivets of a cone shape with a diameter of 0.6 mm for detailing models of military equipment. The maker is GAS HANS.
A bolt with flats for a wrench, 1.6 mm closes the range of sizes from the brand GAS HANS at the top. The box holds 81 pieces and is the only one in this branch of sizes matched to a drill of a full millimeter.
A 1.4 mm bolt head with flats around the circumference is large enough to form a visual detail in its own right. GAS HANS puts a round 100 pieces in the box, and the hole is drilled at 0.8 mm.
A bolt with flats for a wrench, 1.2 mm aims at the larger scales. The brand GAS HANS supplies 144 printed heads; for this size the mounting hole is drilled at seven tenths of a millimeter.
A one-millimeter bolt head with flats for a wrench is the most generously filled item in the upper half of the GAS HANS range: it brings 196 pieces. The hole for seating it is 0.6 mm across.
A 0.9 mm armored bolt with flats for a wrench from the brand GAS HANS holds 128 printed heads. The diameter of the head is 0.9 mm and the mounting hole is drilled at six tenths of a millimeter.
An armored bolt with flats for a wrench, 0.8 mm is a 3D printed detail from the Czech brand GAS HANS. The box holds 162 heads 0.8 mm across, which are seated in a hole drilled at 0.5 mm.
The largest of the sizes in the range, Bullet-Proof Bolt w/Wrench Flats 0.7 mm , aims at massive joints and the large scales. The box holds 171 pieces.
The size Bullet-Proof Bolt w/Wrench Flats 0.6 mm gives a head that will not be lost on a model of an armored vehicle even under paint. The box holds 242 pieces.
The size Bullet-Proof Bolt w/Wrench Flats 0.5 mm stands at the boundary beyond which a part can be picked up for the first time even without tweezers. The box holds 312 pieces.
With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:
Always active
Necessary cookies
These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.
Analytical cookies
They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.
Marketing cookies
They collect information to better tailor advertising to your interests, both on and off this website.
To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.
