Dead Design 1:72 Buccaneer S.2B National Insignias And Stencils is a set of masks for the national insignia and the technical stencils of a model of the British strike aircraft in 1:72 scale. The markings are sprayed straight into the paint.
The 1:72 Buccaneer S.2B/D canopy mask from Dead Design is a pre-cut self-adhesive set for the canopy framing, cut for the older 1989 release of the Airfix kit.
The 1:72 Mitchell Mk.II canopy mask set from Dead Design. The templates cover the glazed areas of the twin-engine bomber, so the frames can be sprayed in one go and evenly. Target kit: Airfix.
Dead Design 1:72 B-25B Mitchell canopy mask is a masking set for the glazing of a model of the twin-engine bomber North American B-25B in 1:72 scale. It covers the glazed areas that are the worst to mask on a bomber. Target kit: Airfix.
A masking set for the glazing of the cabin for the kit of the Curtiss SOC-3 Seagull in 1:72 scale from Hasegawa. The pre-shaped parts take the place of the lengthy cutting of strips of adhesive tape.
Masks for the national insignia and the technical lettering F-4B/J/N Phantom II in 1:72 scale from Dead Design take the place of decals with sprayed markings without a carrier film. Intended for the Fine Molds, Fujimi, Hasegawa and Monogram kits.
Masks for the national insignia and the technical lettering F-4C/D Phantom II in 1:72 scale from Dead Design make it possible to spray the markings, so the glossy intermediate coat and the decal softener are done away with.
Masks for the national insignia and the technical lettering F-4E/EJ/G Phantom II in 1:72 scale from Dead Design give markings that cannot be rubbed off during weathering or clear coating. The set is intended for the Fine Molds, Fujimi, Hasegawa or Italeri kits.
Masks for spraying the national insignia and the technical lettering onto a model of the Phantom II in the RF-4C and RF-4E versions in 1:72 scale. The set is intended for the Fujimi, Hasegawa and Italeri kits.
Dead Design 1:72 Phantom FG.1/FGR.2 is a set of masks for the British national insignia and the technical lettering. The markings are sprayed straight onto the model, without the carrier film of a decal.
Dead Design 1:72 RF-4C and RF-4E Phantom II is a masking set for the glazing of the cabin. It covers the clear areas of the tandem canopy, so that only the frame can be sprayed.
The glazing mask F-4 E/G/S Phantom II in 1:72 scale from Dead Design takes the place of drawing the frame of the cabin out by hand with a brush, using a precisely cut self-adhesive film.
The glazing mask F-4 C/D Phantom II in 1:72 scale from Dead Design is a pre-cut self-adhesive set that covers the glass of the tandem cabin and leaves the frame free.
Dead Design 1:72 Sea Venom FAW.21 is a set of national insignia masks. The roundels are sprayed straight onto the model, so there is no carrier film under them.
Dead Design 1:72 Sea Venom FAW.21 is a masking set for the glazing of the cabin. The pre-cut templates cover the glazing and leave the paint only the frame.
Dead Design 1:72 Sea Vixen FAW.2 is a set of national insignia masks. The insignia arises straight in the finish, without the carrier film that causes silvering with decals.
A set of masks for spraying the national insignia onto a model of the Tornado in the GR version in 1:72 scale. The markings are sprayed in paint, so no carrier film of a decal is left on the surface.
The set 1:72 Panavia Tornado IDS - national insignia masks makes it possible to spray the insignia instead of sticking decals on. A multicolored insignia arises by layering sprayed coats within one mask.
The glazing mask E/B-66 Destroyer in 1:72 scale from Dead Design is a pre-cut self-adhesive set for the frame of the cabin of the twin-engine jet aircraft.
With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:
Always active
Necessary cookies
These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.
Analytical cookies
They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.
Marketing cookies
They collect information to better tailor advertising to your interests, both on and off this website.
To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.
