Plastic Model Kits - All Subjects and Scales – page 1284

Dead DesignNM480941:48

1:48 Javellin

A masking set in 1:48 scale for the British interceptor Gloster Javelin.

In stock

7.56 €

Dead DesignNM480931:48

1:48 RF-4B/C Phantom II Nat. Ins

The set of national insignia masks for the RF-4B and RF-4C Phantom II in 1:48 scale from Dead Design. The insignia are sprayed in paint, so they settle into the finish instead of lying on it.

In stock

7.16 €

Dead DesignNM480921:48

1:48 RF-4B/C Phantom II In And Out

A masking set for the reconnaissance Phantom II in the RF-4B and RF-4C versions in 1:48 scale, in the form for the outer and the inner side.

In stock

10.76 €

Dead DesignNM480911:48

The set of glazing masks RF-4B, RF-4C and RF-4E Phantom II in 1:48 scale from Dead Design. It covers the glazing of the cabin of the reconnaissance Phantom, so that the frames can be sprayed with a sharp edge.

In stock

7.56 €

Dead DesignNM480881:48

1:48 Sea Vixen

Dead Design 1:48 Sea Vixen is a masking set for the glazing of the two-seat carrier-borne fighter de Havilland Sea Vixen in 1:48 scale. The masks follow the shape of the frame, so the paint stays only where it is meant to be.

In stock

7.56 €

Dead DesignNM480871:48

1:48 AH-1G Cobra Nat. Insignias

Dead Design 1:48 AH-1G Cobra Nat. Insignias are masks for the national insignia. Instead of a decal, the insignia is sprayed straight onto the surface of the model.

In stock

6.76 €

Dead DesignNM480861:48

1:48 AH-1G Cobra In & Out

Dead Design 1:48 AH-1G Cobra In and Out is a set of masks for the outer and the inner side of the glazing. The frame of the cabin is then correctly colored even when seen from the interior.

In stock

9.56 €

Dead DesignNM480851:48

1:48 AH-1G Cobra

Dead Design 1:48 AH-1G Cobra are pre-cut self-adhesive masks for the frames of the glazing of the cabin of the attack helicopter. The frame is sprayed with a sharp edge and the clear surfaces stay transparent.

In stock

7.16 €

Dead DesignNM480841:48

1:48 Phantom FG.1/FGR.2 Nat. Ins.

The set of national insignia masks for the Phantom FG.1 and FGR.2 in 1:48 scale from Dead Design. The markings are sprayed in paint straight onto the surface of the model, so they follow its shape perfectly.

In stock

7.16 €

Dead DesignNM480831:48

1:48 Phantom FG.1/FGR.2 In And Out

The set of glazing masks Phantom FG.1 and FGR.2 1:48 for the inner and the outer side from Dead Design. Intended for models where an open cabin is reckoned with.

In stock

10.76 €

Dead DesignNM480821:48

1:48 Phantom FG.1/FGR.2

The set of glazing masks Phantom FG.1 and FGR.2 in 1:48 scale from Dead Design. It covers both parts of the tandem cabin of the British Phantom, so that the frames can be sprayed cleanly.

In stock

7.56 €

Dead DesignNM480811:48

1:48 A-4E/F/K Skyhawk In and Out

1:48 A-4E/F/K Skyhawk In and Out is a set of glazing masks for the inner and the outer side of the cabin of a model of the Skyhawk in 1:48 scale. The frame then looks right even when seen from the interior.

In stock

9.56 €

Dead DesignNM320491:32

1:32 Hurricane Mk.IIc National Insignias (Revell)

Hurricane Mk.IIc - national insignia masks 1:32 are not masks for the cabin: they serve to have the roundels and the national insignia sprayed in paint instead of being stuck on as decals.

In stock

8.76 €

Dead DesignNM320481:32

1:32 Hurricane Mk.IIb In And Out (Revell)

Hurricane Mk.IIb - glazing masks for the inner and the outer side, 1:32 make it possible to spray the frame of the cabin from both sides, so that it looks right when you look into the interior too.

In stock

11.56 €

Dead DesignNM320451:32

1:32 AH-1G Arctic Cobra In And Out

The double-sided set 1:32 AH-1G Arctic Cobra - masks for the outer and the inner side of the glazing makes it possible to spray the frames of the cabin from both sides. The frame is then correctly visible from the interior of the helicopter too.

In stock

11.56 €

Dead DesignNM320441:32

1:32 AH-1G Arctic Cobra (ICM)

The set 1:32 AH-1G Arctic Cobra - glazing masks is intended for a model of the attack helicopter. It covers the flat panes of the cabin, which against the bubble canopy of an aircraft have sharp straight edges. The set is intended for the ICM kit.

In stock

8.76 €

Dead DesignNM320431:32

1:32 Vampire F.3 National Insignias And Stencils (Infinity Models)

1:32 Vampire F.3 National Insignias And Stencils is a set of masks for the national insignia and the technical lettering for a model of the Vampire F.3 aircraft in 1:32 scale. The markings are sprayed, not stuck on.

In stock

8.76 €

Dead DesignNM320421:32

1:32 Dh Vampire F.3 In And Out (Infinity Models)

A masking set for a model of the de Havilland Vampire F.3 in 1:32 scale in the form for the outer and the inner side, for the Infinity Models kit.

In stock

11.56 €

Dead DesignNM320411:32

1:32 Dh Vampire F.3 (Infinity Models)

A masking set for a model of the de Havilland Vampire F.3 in 1:32 scale, prepared for the Infinity Models kit.

In stock

8.76 €

Dead DesignNM320401:32

1:32 Spitfire Mk. Vb/Trop - National Insignias A Type Roundels CORRECTED (Hobby Boss)

Masks for type A national insignia for a model of the Spitfire Mk.Vb in the tropical form, 1:32 scale, for a Hobby Boss kit.

In stock

8.76 €

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.